AMW catch can
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 70
Likes: 0
From: college station, Tx
easiest way to order as of right now (until we get our new web page up) is to email me direct and go from there.
The "clear" is basically anodizing without any color pigment added, looks the same as un-coated aluminum.
The "clear" is basically anodizing without any color pigment added, looks the same as un-coated aluminum.
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 70
Likes: 0
From: college station, Tx
New web sight is up, info. on the cans are in the sight along with purchase options. if you have any questions that are not on the sight feel free to call or email. Link to sight is also on the sponsor list ------->
Thanks to all of those who have purchased the kits already, pleasure dealing with the LS1 crowd and with LS1tech.
Thanks to all of those who have purchased the kits already, pleasure dealing with the LS1 crowd and with LS1tech.
Todd--I got my catch can the other day (Jason from Lexington), and I must say that this is one quality setup. I HIGHLY suggest this can to anyone looking for one. It looked so good, I hated even getting my dirty hands on it! 
Bracket Todd I got the bracket from Dark ages (AL) and it works and looks great now for the blk fittings to go with the hose clamps
I need some of those hose clamps .
The fittings and clamps are first class
Would like some clamps for the coolent by pass and other stuff
John
I need some of those hose clamps .
The fittings and clamps are first class
Would like some clamps for the coolent by pass and other stuff
John
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 70
Likes: 0
From: college station, Tx
for those considering purchasing the AMW catch can, please bare with us while we get more kits in stock. We didn't realize how well they were going to sell and again we would like to thank those who have already purchased the kits. We should be restocked within a week or so.
I just want to Thank Todd for such a quality piece ,and I'm sure glad I waited to get his product for the vette.
I used Dark ages (Al) bracket and it looks like it came with the car.
Thank you for fine products.
John
I used Dark ages (Al) bracket and it looks like it came with the car.
Thank you for fine products.
John
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 70
Likes: 0
From: college station, Tx
some benifits include reduced detonation and a cleaner throttle body/intake due to the removal of contaminates that enter the combustion chamber from the crankcase via the pcv
Hey Todd, I finally got around to installing my AMW catch can today. I mounted it on the inner fender, on the passenger side of the engine bay. Installation went very well, had to drill the holes a bit larger than 1/8 because the sheetmetal there was very thick and the screws wouldn't pull themselves in. No biggie.
The catch-can is an awesome piece, you guys really put alot of time into this design, and the quality shows througout. I'm very happy with it!
Thanks again,
Tony
The catch-can is an awesome piece, you guys really put alot of time into this design, and the quality shows througout. I'm very happy with it!
Thanks again,
Tony
I want to re-check something. I did get my catch-can couple weeks ago. Agree with everyone, quality, easy install.
Now the question(s) (remember, I have the LS6 intake, with the LS6 PCV by-pass and LS6 valley): top plug on catch-can goes to the PCV value that goes to the tube coming out of the valley cover; and middle plug goes to the intake plug. RIGHT? What would happen if these ever got mixed up?
Thanks -- by the way Todd - thanks for the quick service on getting the catch-can to me.
David
Now the question(s) (remember, I have the LS6 intake, with the LS6 PCV by-pass and LS6 valley): top plug on catch-can goes to the PCV value that goes to the tube coming out of the valley cover; and middle plug goes to the intake plug. RIGHT? What would happen if these ever got mixed up?
Thanks -- by the way Todd - thanks for the quick service on getting the catch-can to me.
David
TECH Veteran
Joined: Sep 2002
Posts: 4,469
Likes: 3
From: NW Houston
Originally Posted by hugger427
Simply the best catch can in the market (IMO)
http://community.webshots.com/photo/...28324294cwgBOe
http://community.webshots.com/photo/...28324465lxYSeP
http://community.webshots.com/photo/...28324294cwgBOe
http://community.webshots.com/photo/...28324465lxYSeP
Thread Starter
Staging Lane
Joined: Feb 2004
Posts: 70
Likes: 0
From: college station, Tx
As far as getting the lines mixed up, the vac. would be running the wrong way through the can, don't think the functionality of the can will work as intended.
Easy way to check if it is hooked up correctly is to pull the hose off the top fitting (with engine running) and check to see if you have vacuum being pulled through the can.
Easy way to check if it is hooked up correctly is to pull the hose off the top fitting (with engine running) and check to see if you have vacuum being pulled through the can.
