LTs ORY and high flows
Thread Starter
Staging Lane
Joined: Nov 2011
Posts: 68
Likes: 1
From: Southern CA
LTs ORY and high flows What's up enthusiasts, I have Heddmen lts on my 98 T/A but I wanna change them because the driver header hits the k member. I wanna just go with a new set up to go with my Dynomax bullets! So, I was thinking new LTS with high flow cats and a ORY.. Anyone have a good set up option? The bullets just like that are loud, so I wanted to quiet them just a tad lol.. I was thinking a better set of fitting headers.. Maybe Pacesetter? Not too sure on which high flows or ORY! Need opinions!
Thread Starter
Staging Lane
Joined: Nov 2011
Posts: 68
Likes: 1
From: Southern CA
Thanks for the reply! Your SLPs don't give you problems with clearance? I've read that many members here try and avoid them! Is it an SLP y?
Thread Starter
Staging Lane
Joined: Nov 2011
Posts: 68
Likes: 1
From: Southern CA
If you want to spend a bunch of money on headers, skip the SLPs and go straight to Kooks or ARH. That being said, I wouldn't throw away perfectly good headers just because they hit the K-member... some people have had that issue even with high dollar headers. Just notch the K and be done with it.
Thread Starter
Staging Lane
Joined: Nov 2011
Posts: 68
Likes: 1
From: Southern CA
If you want to spend a bunch of money on headers, skip the SLPs and go straight to Kooks or ARH. That being said, I wouldn't throw away perfectly good headers just because they hit the K-member... some people have had that issue even with high dollar headers. Just notch the K and be done with it.
Any other set up recommendations?/ headers?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Teching In
Joined: Jul 2009
Posts: 42
Likes: 0
i also have a 98 t/a with heddmen hedders just installed and i see its kinda close like barely touching something ? but oh well i didnt installed them, my question is what would happen? what is the concern sir, since they are design for fbodies why would someone have a problem? you think it would melt something? whats the worst that could happen? because i am concerned now that i read this.
and dont they sell a headers heat wrap? do you have them with non? or should we ceramic coat them?
and dont they sell a headers heat wrap? do you have them with non? or should we ceramic coat them?
