Should I do a fast along with h+c?
#62
10 Second Club
iTrader: (30)
Only if the connecting bellow or intake hose is a step up version i.e. 3.5" stepped to 4" at the TB. The stock accordion bellow is setup this way. However, the gm 85mm maf will not slide into the opening of the slp 78mm lid orifice, I hope that's obvious lol, but it will slide perfectly into the FTP 98/102mm orifices.
#68
^^ they want you to port the snout from 92 into 95... Just buy a 92 and be done... I doubt 3mm will gain anything to the wheels... And dnt buy SLP MAF... I read alot of bad reviews. Check out GM direct or buy a MAF from a 2002+ truck. They have 85mm MAF
#75
That wasn't a SLP... it was GM ZO6... Same thing GMDP will sell you for $170 before shipping... I've read alot of bad reviews on the SLP MAG... I would just find a MAF from a 02+ GM truck
#77
#79
TECH Fanatic
iTrader: (18)
Racetronix has them:
http://www.racetronix.biz/itemdesc.a...AF-001&eq=&Tp=
If buying the z06 plus the cost of that adapter. Hell it would almost be better to just go with the SLP.
Have you considered Speed Density?
EDIT: thats for 06+ Z06 maf sorry about that. JEG's has them.
http://www.racetronix.biz/itemdesc.a...AF-001&eq=&Tp=
If buying the z06 plus the cost of that adapter. Hell it would almost be better to just go with the SLP.
Have you considered Speed Density?
EDIT: thats for 06+ Z06 maf sorry about that. JEG's has them.
Last edited by My6speedZ; 07-03-2012 at 09:52 PM.
#80
Racetronix has them:
http://www.racetronix.biz/itemdesc.a...AF-001&eq=&Tp=
If buying the z06 plus the cost of that adapter. Hell it would almost be better to just go with the SLP.
Have you considered Speed Density?
http://www.racetronix.biz/itemdesc.a...AF-001&eq=&Tp=
If buying the z06 plus the cost of that adapter. Hell it would almost be better to just go with the SLP.
Have you considered Speed Density?
That is 25 bucks + shipping. The maf from gmparts direct is 212.15 with shipping.
Might as well just get the one from ws6 store and be done. That one isnt an slp if your refering to the one I posted.