Chance to buy SLP equal length headers
07-02-2012, 05:05 PM
#1
Chance to buy SLP equal length headers I can get SLP equal length headers locally for 200 and they still look really nice. Question: What type of y pipe is needed to make this fit my 00 Z28? Are these good headers, I assume they are?
Last edited by cmking26; 07-02-2012 at 05:21 PM.
07-02-2012, 05:28 PM
#3
Wow thanks for the help. I did a search but only found all the threads about the slp's hanging low, and the y pipe being very low. So again my question is what y pipe should I get with these, is there one that fits and doesn't sit as low?
07-02-2012, 05:36 PM
#4
Pass on them...they have the worst ground clearance of all header designs, and some independent dyno testing in the past proved they didn't provide the power gains that SLP promised (hence why the poster above told you to do a forum search).
Trending Topics
07-02-2012, 07:11 PM
#8
On The Tree
iTrader: (4)
Join Date: Apr 2012
Location: Southern California
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
I bought a set of slp headers I believe they are the older style not too sure as they were used. I have my car lowered about 1" and I don't really have clearance issues at all with the actual headers, a friend and I made a custom ory though because like you I couldn't get any answers on a comparable y pipe that I could substitute. My y pipe does scrape really badly but that is because we routed it just underneath the tranny crossmember on the drivers side, that's going to get re routed here soon.
07-02-2012, 08:24 PM
#10
The old style is the tuned length, there the only ones that hang really low. The equal length is the new style, and your best bet is to get a SLP y-pipe; if you can find one!
If you can't find a y-pipe pass on them!
If you can't find a y-pipe pass on them!
Last edited by 99Bluz28; 07-02-2012 at 08:37 PM.
07-03-2012, 12:53 AM
#12
^^^ I wouldn't pass cuz of that. Just get a custom ORY made. $200 is a steal for SS SLP LTs. Jump on em
07-03-2012, 02:20 AM
#13
On The Tree
iTrader: (4)
Join Date: Apr 2012
Location: Southern California
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Agreed with 2win_ss. Don't pass on them, like we both said, $200 for those headers is a steal steal steal. Buy them and resell them if you can't find a set up that will work for you, I got lucky to have a friend that builds sand rails, don't know if anybody has heard of wicked sand toys, but that's my buddies business, he and I sat down and fabbed up a y pipe for my car, granted I only did the cutting he told me to and he did all the welding lol but it was still something I wanted to have a part in and learn as much as possible
