TSP True Duals install help

Reply Subscribe

Thread Tools

Search this Thread

Sep 6, 2012 | 02:17 PM

Nzzy08

Thread Starter

Teching In

Joined: Dec 2009

Posts: 4

Likes: 0

TSP True Duals install help

Im in the process of trying to install these but i keep ending up at the same spot. I get the X pipe connected to the passanger and driver side but the driver side just hangs way too low. Any tips from those who have sucessfully installed these before? haha.

Sep 6, 2012 | 03:01 PM

DirtyJohn

12 Second Club

iTrader: (8)

Joined: Jul 2004

Posts: 708

Likes: 0

From: Vancouver, BC

If flipping your X-pipe over doesn't fix it (which is the most common mistake) read this : Install

Sep 6, 2012 | 03:54 PM

Decadence75

TECH Resident

iTrader: (17)

Joined: Nov 2011

Posts: 878

Likes: 1

From: Pearl, MS

You can also use a jack to help support the X and hold it in place while you tighten things up. It's what I had to do to make it tuck up well.

Sep 6, 2012 | 04:02 PM

k_garretson23

TECH Enthusiast

iTrader: (8)

Joined: Jul 2011

Posts: 661

Likes: 0

From: clementon, nj

not really the same issue but it may help. My hangers were very long so I had a shop cut and weld them up a little higher and I have no clearance issues.

Sep 6, 2012 | 04:38 PM

Nzzy08

Thread Starter

Teching In

Joined: Dec 2009

Posts: 4

Likes: 0

well i shouldve specified but the the 2 pipes coming off the driver side header is where im having my issue at. like i said i can get them connected to the x pipe just dont seem to push up nearly enough like they should