need intake solution for SD tune
Thread Starter
Teching In
iTrader: (7)
Joined: Jan 2012
Posts: 42
Likes: 0
From: Shreveport, LA (originality from Columbus, GA)
need intake solution for SD tune i cant find any sort of intake tube to go from my slp lid to my fast 102 tb that does without the maf. is there anything out there for sale that is made for the connection or is everyone just fabing something up? could use some links or ideas with this one. thanks
I would go with the 98mn FTP Lid for your 102mm if your doing a speed density tune. Otherwise you can go with FTP's 104mm Lid.
http://www.afterthoughtsauto.com/fas...mm-airlid.html
http://www.afterthoughtsauto.com/fas...mm-airlid.html
Texas Speed makes a 102 or 104mm lid. They might offer a larger MAF also if you want to keep one.
As for piping, that's really a fab kind of deal. Most that go this route have a laundry list of other engine bay mods that make a "bolt-on part" pretty much useless. I've completely ditched the lid setup and ram air box all together. Lots of fab work I'm hoping will pan out as planned. Never know til you try though.
As for piping, that's really a fab kind of deal. Most that go this route have a laundry list of other engine bay mods that make a "bolt-on part" pretty much useless. I've completely ditched the lid setup and ram air box all together. Lots of fab work I'm hoping will pan out as planned. Never know til you try though.
Highly doubt anyone makes a piece to drop-in your setup. Primarily because that lid is much smaller than your FAST 102mm tb, so your lid is your choke point.
An exhaust shop should be able to bend you a pipe for a decent price.
An exhaust shop should be able to bend you a pipe for a decent price.
10 Second Club
Joined: Jan 2010
Posts: 2,317
Likes: 20
From: Hurley, VA
I'm running a 102mm TB, to 85mm maf, to a SLP lid. I used a fernco coupler from home depot to go from my TB to MAF. And the small bellow that comes with the maf to attach it to the lid. You could get a short piece of piping to substitute for the maf and do it the same way. Other than that I would check out intakehoses website or try googling 4" to 3.5" silicone hose (I think those are the sizes, measure to be sure).
measure your o.d of tb and find a coupler that has a 22* bend that will connect to w e size piping you need to fit into your lid, that what i did with my sd setup. i can post a pic of mine if you wana see. i bought my coupler off ebay and a piece of aluminum piping. im in stock tb and a thunder racing lid tho so sizing will be differnt
Trending Topics
Here is a pic of my 1st procharger set up after going SD tune. I had to make my own pipe to fit. http://mycarpics.shutterfly.com/287#287
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
