LS6 valley cover conversion - what's this part?!?
Thread Starter
Staging Lane
Joined: Jun 2013
Posts: 59
Likes: 1
From: Pensacola, FL
LS6 valley cover conversion - what's this part?!? Hi all, first post here, normally search and lurk to get what I need. Now I need some help.
I did the LS1 to LS6 valley cover today. I also installed a new OPSU to hopefully stop a pesky oil leak. Also did new knock sensors and the wiring harness. Everything has gone good so far and I'm letting the intake dry overnight (soaked it in dish detergent and purple power to remove the oil and gunk inside). I removed the fuel rails and the sensor on the back of the intake manifold before i soaked it (duh). Also removed the purge solenoid.
However, as I'm cleaning up, I see this clip-like button thing underneath the car on the pavement kinda on the driver's side right behind the k-member. It's plastic except for the part underneath the button part which is metal. Pics are attached. Anyone know what the hell it is? Thanks!
I did the LS1 to LS6 valley cover today. I also installed a new OPSU to hopefully stop a pesky oil leak. Also did new knock sensors and the wiring harness. Everything has gone good so far and I'm letting the intake dry overnight (soaked it in dish detergent and purple power to remove the oil and gunk inside). I removed the fuel rails and the sensor on the back of the intake manifold before i soaked it (duh). Also removed the purge solenoid.
However, as I'm cleaning up, I see this clip-like button thing underneath the car on the pavement kinda on the driver's side right behind the k-member. It's plastic except for the part underneath the button part which is metal. Pics are attached. Anyone know what the hell it is? Thanks!
Thread Starter
Staging Lane
Joined: Jun 2013
Posts: 59
Likes: 1
From: Pensacola, FL
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
On The Tree
Joined: Oct 2012
Posts: 166
Likes: 0
From: Houston
that is the inside from the opsu, but in order to even get that out you have to break it open. it basically works like a button and there is a "plastic film" that depresses the button when the oil pressure rises on the opposite side on the plastic film
On The Tree
Joined: Oct 2012
Posts: 166
Likes: 0
From: Houston
http://s110.photobucket.com/user/bil...ce03b.jpg.html
if you looks at the one on the left you can see "the button" sticking out the white part
another example
http://i21.photobucket.com/albums/b2...z/100_3565.jpg
if you looks at the one on the left you can see "the button" sticking out the white part
another example
http://i21.photobucket.com/albums/b2...z/100_3565.jpg
