Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Won't go above 3500 rpm .

Thread Tools
 
Search this Thread
 
Old 09-22-2013, 10:30 PM
  #1  
Teching In
Thread Starter
 
rx7SBC's Avatar
 
Join Date: Jul 2012
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default Won't go above 3500 rpm .

The car won't go above 3500 rpm . It acts like it hits a rev limiter . I just go the engine built and this is the first time I have gotten on the car and it won't go above 3500 rpm . I have recently changed the plugs , and change the coils . I had a misfire problem found out the coils were bad and I changed them out for new ones . I am using a 2002 corvette PCM . The car is a mazda rx7 with a ls1 with a ls6 heads . I I monitor the gauges well . Nothing abnormal . I have 4 ground on the engine . I can't figure out why it is doing this .
Old 09-23-2013, 04:12 AM
  #2  
TECH Fanatic
 
ls1 1990 VN's Avatar
 
Join Date: Aug 2004
Location: Auckland, Nth Is, New Zealand.
Posts: 1,371
Received 4 Likes on 4 Posts

Default

Engine been tuned!



Quick Reply: Won't go above 3500 rpm .



All times are GMT -5. The time now is 02:33 PM.