Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Which wires to ground for ABS/TCS delete dash light?

Old Aug 24, 2014 | 03:17 PM
  #1  
jc98ss's Avatar
Thread Starter
TECH Enthusiast
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (13)
 
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Default Which wires to ground for ABS/TCS delete dash light?

does anyone have a part number for the non-cruise control throttle cable i need for a 1998?.....i found 12565559 but i'm not sure

i've read several threads that say there's a wire or two you can ground out after you've deleted ABS/TCS and it will kill the lights in your dash.....but they never actually say which ones, only alot of bickering back and forth on whehter it's a good idea to remove ABS/TCS in the first place.....i tried searching, but is there an actual write up on this?......anyone else done it and know which wires need to be messed with?
Reply
Old Aug 24, 2014 | 08:18 PM
  #2  
jc98ss's Avatar
Thread Starter
TECH Enthusiast
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (13)
 
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Default

anybody?
Reply
Old Aug 25, 2014 | 09:54 AM
  #3  
jc98ss's Avatar
Thread Starter
TECH Enthusiast
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (13)
 
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Default

C'mon......someone out there knows this
Reply
Old Aug 25, 2014 | 01:04 PM
  #4  
Marc 85Z28's Avatar
TECH Fanatic
iTrader: (8)
 
Joined: Sep 2005
Posts: 1,395
Likes: 6
From: MD
Default

You have a 98, so you're in luck: https://ls1tech.com/forums/drag-raci...bs-delete.html
Reply
Old Aug 27, 2014 | 07:42 AM
  #5  
jc98ss's Avatar
Thread Starter
TECH Enthusiast
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (13)
 
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Default

Awesome, thanks man
Reply
Old Aug 31, 2014 | 05:46 PM
  #6  
jc98ss's Avatar
Thread Starter
TECH Enthusiast
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (13)
 
Joined: Mar 2010
Posts: 732
Likes: 13
From: Murfreesboro, TN
Default

just finished wiring it up.....worked like a charm......now i just need to figure out if there is a way to get the ASR light off......if there isn't a wiring trick i may have to pull the cluster and block it out with tape
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:17 PM.