Suggestions

Reply Subscribe

Thread Tools

Search this Thread

Aug 28, 2014 | 05:34 PM

sh0rtys463

Thread Starter

Teching In

Joined: Feb 2012

Posts: 41

Likes: 0

From: Henderson, NV

Suggestions

So I haven't purchased anything for the car in quite some time and would like to buy it a present. I'm looking to add some power and hoping for some advice as far as where my money would be best spent. The car currently has a TSP torquer v2 cam, supporting mods for cam, long tubes, and that's about it I guess. Motor is from a 2004 gto.

I was eying a fast 92 manifold/throttle body in the classified section (comes with 48lb injectors, is that overkill for where I'm at?)

Also been considering buying new heads but not sure which heads...(suggestions?)

Any other suggestions for mods?

Thanks for the help guys.

Aug 28, 2014 | 06:19 PM

HCI2000SS

TECH Senior Member

iTrader: (2)

Joined: Aug 2012

Posts: 11,137

Likes: 20

From: Howell & Fenton MI

IMO the fast isn't overkill, but I'd go after heads first. What's your budget?

Aug 28, 2014 | 06:24 PM

sh0rtys463

Thread Starter

Teching In

Joined: Feb 2012

Posts: 41

Likes: 0

From: Henderson, NV

Well I'd like to keep it close to/below $2k so I'm sure I'm pretty limited as far as heads go but may splurge a little if it's not too crazy expensive.

Aug 28, 2014 | 06:25 PM

sh0rtys463

Thread Starter

Teching In

Joined: Feb 2012

Posts: 41

Likes: 0

From: Henderson, NV

And when I was referring to overkill I meant the injectors...is that too much injector or would 48's be ok where id be at

Aug 28, 2014 | 06:28 PM

HCI2000SS

TECH Senior Member

iTrader: (2)

Joined: Aug 2012

Posts: 11,137

Likes: 20

From: Howell & Fenton MI

For 2k you can get some pretty good heads actually. Those injectors will be fine once the car is tuned for them

Aug 28, 2014 | 06:34 PM

sh0rtys463

Thread Starter

Teching In

Joined: Feb 2012

Posts: 41

Likes: 0

From: Henderson, NV

Any head suggestions? I don't want to change cam so it would need to suit it

Aug 28, 2014 | 07:38 PM

HCI2000SS

TECH Senior Member

iTrader: (2)

Joined: Aug 2012

Posts: 11,137

Likes: 20

From: Howell & Fenton MI

Well I used to run the Torquer 2 cam with my PRC 5.3 heads and it was a nice combo. You can get the heads for around $1200 from Texas Speed. They do pretty damn good for the money

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Aug 28, 2014 | 07:44 PM

HCI2000SS

TECH Senior Member

iTrader: (2)

Joined: Aug 2012

Posts: 11,137

Likes: 20

From: Howell & Fenton MI

No problem. Keep us posted

Aug 28, 2014 | 07:55 PM

#10

sh0rtys463

Thread Starter

Teching In

Joined: Feb 2012

Posts: 41

Likes: 0

From: Henderson, NV

One more question for you. For the prc heads, what is the different between the ls6 heads and 5.3? The price difference isn't much so I'm just wondering if it would be better to get the ls6 heads..

Aug 29, 2014 | 09:24 AM

#11

dr_whigham

The Scammer Hammer

iTrader: (49)

Joined: Apr 2009

Posts: 6,717

Likes: 24

From: Lafayette, LA

Get the LS6's if it's in the budget.

I'd personally pick up the phone and call, ask for Aaron (doesn't matter WHO, but that's who I always talk to) and see what they think. It's their cam / heads... They'd know best.