Brian Greene Ram Air - Any place to get anymore?
02-15-2016, 09:11 PM
#21
The advantages are that there is no blocking of airflow to the radiator, said to keep ECTs lower at idle, it's not sucking hot air off the asphalt (again, pretty much an issue at idle) and less danger of sucking up water from a puddle and getting hydrolocked. I know that there are those who will argue that these are all non-issues, and those who will assert the opposite from their own experience. I don't have a dog in the hunt on this, but because you asked, those are the supposed advantages of using the scoops.
02-23-2016, 09:26 PM
#23
I am having to make new gaskets for my BG ram air as well. Kind of a tedious process but I got it done. He stopped making them because his supplier cost got too high. I told him to just raise his prices to compensate but I guess he didn't feel like dealing with it. Too bad, it is a great setup. I painted my internal nose baffles SOM to match my car.
03-05-2016, 01:10 AM
#24
10 Second Club
I too had the BGRA and loved it. But I got rid of my WS6 a few years ago. When I got my second WS6 I was like you and was looking every where for it. Had no luck so I went with the JAAM. Not the BGRA but I think it works pretty good.
09-29-2016, 03:46 AM
#25
OK guys this is now for sale pm me don't have my car anymore. This will not be cheap this is the best and no longer made. Will take 390.00 shipped PayPal. If you want it hit me up this will go fast for sure. SOLD.
Last edited by Robert Cantu; 09-29-2016 at 05:47 AM. Reason: Sold.
10-01-2016, 11:46 PM
#28
That system was so well designed and produced that it's hard to believe that someone hasn't bought the rights and continued to manufacture it.
Hell, I didn't even have a WS6 and I bought a used one when it came up for sale on here years ago - just because it was rare, and if there was ever a chance that I might be able to use it, this was my one chance to get it.
I offered it to my brother, but he decided to keep his WS6 bone stock, so it's sitting on a friend's car ... anyway, that's my BGRA story.
Hell, I didn't even have a WS6 and I bought a used one when it came up for sale on here years ago - just because it was rare, and if there was ever a chance that I might be able to use it, this was my one chance to get it.
I offered it to my brother, but he decided to keep his WS6 bone stock, so it's sitting on a friend's car ... anyway, that's my BGRA story.
05-07-2021, 03:25 PM
#29
Teching In
Join Date: Feb 2018
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Help on gasket I am having to make new gaskets for my BG ram air as well. Kind of a tedious process but I got it done. He stopped making them because his supplier cost got too high. I told him to just raise his prices to compensate but I guess he didn't feel like dealing with it. Too bad, it is a great setup. I painted my internal nose baffles SOM to match my car.
12-10-2023, 09:18 AM
#30
I have the BGRA kit on mine, but the gasket that goes on the backside of the hood to seal the air intake to the airbox is gone. I know it's a long shot in the dark, but does anyone currently have one still? I'd like to get measurements or more detailed photos in order to make some. Based off the instructions, I do have some measurements, but something a bit more direct would be great.
Is Brian able to be contacted still? I'm curious if he might have the specs after all this time
Is Brian able to be contacted still? I'm curious if he might have the specs after all this time
The following users liked this post:
WS6 #3392 (12-10-2023)
12-11-2023, 02:34 PM
#32
LS1Tech Administrator
iTrader: (3)
Join Date: Nov 2001
Location: Schiller Park, IL Member: #317
Posts: 32,285
Likes: 0
Received 1,713 Likes
on
1,228 Posts
I still have a couple of original, unused gaskets for this kit. I bought two spares back when I still had my WS6 car, which was nearly 20 years ago. I ran across these spare gaskets when I moved back in 2019, and I know I brought them with me, but I can't remember where I put them. They are somewhere in my house, and if I ever find them I can take some pics and measurements.
12-11-2023, 02:49 PM
#33
I still have a couple of original, unused gaskets for this kit. I bought two spares back when I still had my WS6 car, which was nearly 20 years ago. I ran across these spare gaskets when I moved back in 2019, and I know I brought them with me, but I can't remember where I put them. They are somewhere in my house, and if I ever find them I can take some pics and measurements.
01-27-2024, 08:14 PM
#36
I still have a couple of original, unused gaskets for this kit. I bought two spares back when I still had my WS6 car, which was nearly 20 years ago. I ran across these spare gaskets when I moved back in 2019, and I know I brought them with me, but I can't remember where I put them. They are somewhere in my house, and if I ever find them I can take some pics and measurements.
The piece that holds that backing piece with gasket and screws to the inside of the WS6 hood may be removed somewhat easily. If so, I'll get pictures taken with measurements. I haven't had that piece off my car in years but will look. If not easily removed, I can take pics and measurements of it attached to my hood and post.
06-25-2024, 01:59 PM
#38
I can make you a set of these if you’re interested:
https://ls1tech.com/forums/generatio...m-air-kit.html
https://ls1tech.com/forums/generatio...m-air-kit.html
06-27-2024, 12:12 PM
#39
I can make you a set of these if you’re interested:
https://ls1tech.com/forums/generatio...m-air-kit.html
https://ls1tech.com/forums/generatio...m-air-kit.html
- Matt
EDIT: Oh, and interested in those big honeycomb nostrils too.
Last edited by Trans Am WS6 420; 06-27-2024 at 12:18 PM.