Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Security light came on

Thread Tools
 
Search this Thread
 
Old 06-09-2016, 01:14 AM
  #1  
Teching In
Thread Starter
 
jon1234's Avatar
 
Join Date: Jan 2016
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Security light came on

alright so the stupid Security light came on after leaving work i "accidentally" gave it too much gas and the car was swinging and after then light came on but the funny thing is my horn started working again because before it didnt make a noise so i guess swinging the car is good
Old 06-10-2016, 12:08 PM
  #2  
TECH Enthusiast
iTrader: (1)
 
xny1989's Avatar
 
Join Date: Oct 2004
Location: Silver Spring, MD
Posts: 641
Received 10 Likes on 10 Posts

Default

From my experience, it is the wire from the ignition switch that is unable to "read" the resistor in your ignition key. I had this problem and decided to wire in the correct resistors to the wires in the steering column. While this eliminates eliminates this anti-theft device, the alternatives of taking apart the steering column was less desirable. You'll need an ohmmeter to get this to work.
Old 06-11-2016, 12:27 AM
  #3  
Launching!
iTrader: (1)
 
sawblade99Z's Avatar
 
Join Date: Aug 2012
Location: West Plains, MO
Posts: 251
Likes: 0
Received 3 Likes on 3 Posts

Default

Measure the resistance in your key pellet then build a resistor that measures as close to the same as possible. There's lots of info on here about it. Search for vats bypass.



Quick Reply: Security light came on



All times are GMT -5. The time now is 10:44 PM.