Intake Manifold Flow Tests: LS1, LS6, TBSS, BBK, Dorman LS2, 102 Fast LSXRT & more
#404
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Awesome! You're still at it! Good news ont he engine too. Glad you'll have something road worthy before too long. That car is far too pretty to just sit there
#406
I intend to also test the Super Vic on a set of heads with a "wing" in the intake port that was designed for carburetor applications. If time and budget allow, I will dig my old LSXRT out and test it on the winged heads as well.
Full disclosure - on my 91 RS Camaro with the LS1 stroker and a small cam, a ported LS6 90mm intake was better by 2hp in controlled dyno testing than the LSXRT. With a high revving cam, the LSXRT would make more power. My RS was focused on stock driveability etc.
Last edited by 99 Black Bird T/A; 04-09-2018 at 10:35 AM.
#407
In a well matched race engines set up, I've been told by a reputable vendor, in some cases the LSXRT will only be 10 hp off a dedicated Sheet metal intake manifold on a 950-1000 hp engine. However in other combinations that are milder and less race orientated the LSXRT may not excel. So it should be interesting to see what the Super Vic flows
I intend to also test the Super Vic on a set of heads with a "wing" in the intake port that was designed for carburetor applications. If time and budget allow, I will dig my old LSXRT out and test it on the winged heads as well.
Full disclosure - on my 91 RS Camaro with the LS1 stroker and a small cam, a ported LS6 90mm intake was better by 2hp in controlled dyno testing than the LSXRT. With a high revving cam, the LSXRT would make more power. My RS was focused on stock driveability etc.
I intend to also test the Super Vic on a set of heads with a "wing" in the intake port that was designed for carburetor applications. If time and budget allow, I will dig my old LSXRT out and test it on the winged heads as well.
Full disclosure - on my 91 RS Camaro with the LS1 stroker and a small cam, a ported LS6 90mm intake was better by 2hp in controlled dyno testing than the LSXRT. With a high revving cam, the LSXRT would make more power. My RS was focused on stock driveability etc.
#410
We are going to have our biggest test to date!!!
WS6 Store is sending a Dorman, Doan truck and Fast 102 cathedral intake for testing!!!!
Big thank you to WS6 Store and everyone else helping support the testing!
Yes a MSD would round out the testing. Maybe we can round one up for a test one day. The current six intakes s about my my logistics limit for one round of testing.
I suppose I'm going to have to long on with my desktop and tidy up the tread and put all the results on a spread sheet so it's easy to read
WS6 Store is sending a Dorman, Doan truck and Fast 102 cathedral intake for testing!!!!
Big thank you to WS6 Store and everyone else helping support the testing!
Yes a MSD would round out the testing. Maybe we can round one up for a test one day. The current six intakes s about my my logistics limit for one round of testing.
I suppose I'm going to have to long on with my desktop and tidy up the tread and put all the results on a spread sheet so it's easy to read
Last edited by 99 Black Bird T/A; 04-12-2018 at 01:41 PM.
#412
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
I've got a msd sitting in storage
#415
TECH Fanatic
iTrader: (7)
We are going to have our biggest test to date!!!
WS6 Store is sending a Dorman, Doan truck and Fast 102 cathedral intake for testing!!!!
Big thank you to WS6 Store and everyone else helping support the testing!
Yes a MSD would round out the testing. Maybe we can round one up for a test one day. The current six intakes s about my my logistics limit for one round of testing.
I suppose I'm going to have to long on with my desktop and tidy up the tread and put all the results on a spread sheet so it's easy to read
WS6 Store is sending a Dorman, Doan truck and Fast 102 cathedral intake for testing!!!!
Big thank you to WS6 Store and everyone else helping support the testing!
Yes a MSD would round out the testing. Maybe we can round one up for a test one day. The current six intakes s about my my logistics limit for one round of testing.
I suppose I'm going to have to long on with my desktop and tidy up the tread and put all the results on a spread sheet so it's easy to read
TPIS/LPE LS6
Super Vic
Super Auto Truck
DLS2 - ported by WS6 store
Dorman Truck - ported by WS6 store
Fast 102
Is this correct ? please lmk