single exit muffler
Don't know how much, but I'm sure its a fairly rare piece to be found by someone looking to restore their 98 Camaro SS / Z28.
Here's a picture of my 98 SS that I sold last Sept. It sadly has fallen into the hands of a dealer who messed it up... :-(
I bet you could get $500 or more for the SOTL Exhaust, maybe much more.
I’m not certain of the value, but I’ve often thought about finding a complete SOTL muffler with intermediate pipe that I could bolt on to my ‘99 WS6 and compare the two exhaust systems on the dyno.
Is yours complete? And how could you ship it?
Is yours complete? And how could you ship it?
I'm located in MD, not sure where you are.
I have the intermediate pipe, and the muffler.
It's been a long time since I looked at it, but I think I made one cut where it goes over the axle to remove it. It matches right back up, and could easily be welded back together.
All hangers and brackets are in place, and the polished tip is nice.
Shipping would be a killer.
I have the intermediate pipe, and the muffler.
It's been a long time since I looked at it, but I think I made one cut where it goes over the axle to remove it. It matches right back up, and could easily be welded back together.
All hangers and brackets are in place, and the polished tip is nice.
Shipping would be a killer.
I know this is an older thread.
I did this to my old 2000 SS back in 2007...(still have the same old tennis shoes as in the video, LOL)
Used a Dynomax over axle pipe, a generic muffle, a 90 out of it, and a 45 turndown.
I thought it sounded great, and had no rasp, quiet at cruise, loud at WOT...everything I wanted...
I'd do the same to my current car, a T/A, but I think it would look silly since this car has dual openings/cutouts for the exhaust.
My Trans Am HAD a 4" single outlet, but the muffler was a 76mm turbo, lol...(still looked odd only on one side though)
I did this to my old 2000 SS back in 2007...(still have the same old tennis shoes as in the video, LOL)
Used a Dynomax over axle pipe, a generic muffle, a 90 out of it, and a 45 turndown.
I thought it sounded great, and had no rasp, quiet at cruise, loud at WOT...everything I wanted...
I'd do the same to my current car, a T/A, but I think it would look silly since this car has dual openings/cutouts for the exhaust.
My Trans Am HAD a 4" single outlet, but the muffler was a 76mm turbo, lol...(still looked odd only on one side though)
It’s exactly the orientation v6 fbody cars had.
After dealing with poorly made duals on low car and being hassled by the fuzz , I decided to get the dynomax 3” pipes off amazon and throw on a single 3” in/out magnaflow muffler on it. Clean simple with nice idle and WOT combo.
If anything buy a used cat back exhaust for pipes and use your choice of singe in/ single out muffler.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei