Anyone know what this goes too?
#2
12 Second Club
iTrader: (21)
Might be the EGR system. Has yours be removed?
Well actually, just went out and looked and that doesn't seem to be it. I also checked the coolant level sensor plug that I have unplugged and that's not it either.
I've seen that plug before, just gotta rack my brain and think...
Well actually, just went out and looked and that doesn't seem to be it. I also checked the coolant level sensor plug that I have unplugged and that's not it either.
I've seen that plug before, just gotta rack my brain and think...
Last edited by BandDirector Blk98ZM6; 12-15-2018 at 09:03 AM.
#3
11 Second Club
iTrader: (3)
Just finished dropping my engine out so let me take a look at the harness and get back with you.
#4
11 Second Club
iTrader: (3)
I don't see that type of connection anywhere on my engine harness so I assume you have an older harness. I'm wondering if that plugs into the air box lid or in the bellow between the MAF and TB.
#7
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,835 Likes
on
1,145 Posts
Also looks like the 3-pin ACconnector on the V6 camaro fourth gen
Trending Topics
#8
This. I have a 1998 Fornula and an in the process of putting engine back in car. TPS sensor and coolant temp sensor both use this connector. My seals are yellow and not purple but the plugs are the same size and style.
#10
TECH Senior Member
A/C pressure switch connection?
#11
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,835 Likes
on
1,145 Posts
Originally Posted by Philhippy45
I cant seem to figure out what it is. It was attached to something on the passenger side of the car by the wheel well im assuming cruise or ac or something it's not the tps or maf or anything that's on the drivers side.
Originally Posted by Darth_V8r
Also looks like the 3-pin ACconnector on the V6 camaro fourth gen
#13
TECH Senior Member
Or the 5th, 6th, 7th, ……..
#14
#17
11 Second Club
iTrader: (3)
Motor is out of the car and I do have that connector. It goes to either the TPS or MAF. Been installing new cylinder heads this evening but I will verify which one in the morning and get back with you with pictures.
#18
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,835 Likes
on
1,145 Posts
Originally Posted by 01CamaroSSTx
Motor is out of the car and I do have that connector. It goes to either the TPS or MAF. Been installing new cylinder heads this evening but I will verify which one in the morning and get back with you with pictures.
#19
11 Second Club
iTrader: (3)
Tps
Throttle position sensor