Perma-cool 19111 review?
Thread Starter
Teching In
Joined: Apr 2017
Posts: 32
Likes: 4
From: Sunny So. Cal
Perma-cool 19111 review? Anyone running these with success?
Current set up is twin spall 11" pulling an advertised 1350 at 0 static.
Finishing build, adding full sized intercooler sandwiched between VA condenser and 2 core x 1.250 inner tubed Entropy radiator.
Should be fine but 100 degree Cali weather is coming.
Perma-Cool states 2800 cfm.
Current set up is twin spall 11" pulling an advertised 1350 at 0 static.
Finishing build, adding full sized intercooler sandwiched between VA condenser and 2 core x 1.250 inner tubed Entropy radiator.
Should be fine but 100 degree Cali weather is coming.
Perma-Cool states 2800 cfm.
Perma-Cool 19111 11" High Performance Electric Fan Puller
Thread Starter
Teching In
Joined: Apr 2017
Posts: 32
Likes: 4
From: Sunny So. Cal
Trending Topics
Thread Starter
Teching In
Joined: Apr 2017
Posts: 32
Likes: 4
From: Sunny So. Cal
I tend to go over board on anything i do so utilized new 40 amp bosch relays, crimped, silver soldered and shrink wrapped harness but im sure any ol' local parts store relay will do.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Senior Member
Joined: Jun 2016
Posts: 22,298
Likes: 3,619
From: Central Cal.
Does not matter what was, this is what is.
Thread Starter
Teching In
Joined: Apr 2017
Posts: 32
Likes: 4
From: Sunny So. Cal
Not knowing your current set up I would most def install a 3 new independent set as described in diagram vs attempting to decipher what is triggering current set up, pcm, temp probe or both, splitting harness to tie in a 3rd relay, etc.