MSD LS1/LS6 blaster coil....
#1
Staging Lane
Thread Starter
MSD LS1/LS6 blaster coil....
MSD finally released a blaster coil for LS1/LS6 motors. Direct bolt-in, will comply with all factory wiring ad electronics while offering a higher output spark. The coil also delivers multiple spark. The coils will also have a seperate connection for an upcoming LS1/LS6 ignition controller. They are sold individually. CARB approval pending. PN 8245. I am going to call and get pricing when the open in an hour...
#7
Originally Posted by WILWAXU
The price MSD told us at SEMA is very close to the cost of GM new replacements.
I just checked....GM list price is $63.75. MSD will be finding out very quickly that they needed a more reasonably priced solution. The only people that will buy those are pros, or people with too much bloody money.
Last edited by Another_User; 11-16-2004 at 08:59 PM.
Trending Topics
#10
TECH Enthusiast
Join Date: Apr 2004
Location: Chandler, Arizona
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
I just bought a factory replacement for $37, $40 with shipping. That would be $320 for a set of coils and that is way too much for the little power you MIGHT pick up.
#15
TECH Fanatic
iTrader: (9)
Join Date: Jan 2002
Location: DFW
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NoseUp
Definitely a waste. Grab a set of 5.3's if you so desire to swap them. It'll cost you less. $75 per coil....
Just make sure they are the correct coil, the square one not the round one, my 5.3 came with the round ones, and I run the square truck coils on my car
#17
TECH Veteran
iTrader: (5)
Considering you can get truck coils for about half the price, and if your going boost you will have either edit or hp tuner or an aftermarket controller. So no reason to get expensive coils that need the MSD controller to take advantage of any of the features you won't need.
quite a few of us bigger turbo setups are well over 1100 at the motor on factory coils.
quite a few of us bigger turbo setups are well over 1100 at the motor on factory coils.