tsp duals problems HELP!!!!!!
tsp duals problems HELP!!!!!! ok i have the xpipe on and all three front peaces. but the bullets dont seem to be as far back as i need them so the hangers are at the floor pan??? any one esls had this problem? thinking about cutting about 1 1/2" of back part of the x pipe (the stiat part) so the bulletts will be farther back. any suggestions. Is my 9" the problem??
Originally Posted by pontiac
ok i have the xpipe on and all three front peaces. but the bullets dont seem to be as far back as i need them so the hangers are at the floor pan??? any one esls had this problem? thinking about cutting about 1 1/2" of back part of the x pipe (the stiat part) so the bulletts will be farther back. any suggestions. Is my 9" the problem??
When you hang them I would take the back seat out and drill a hole for each hanger and bolt them up instead of using the sheet metal screws it came with. That way you dont ever have to worry about them wallowing the holes out and falling.
