come in here to cry for me
Yeh, I got those. Thanks. I also got the LS6 coolant plugs and bypass from the dealership *ouch* I'll aslo make sure there are no clips on the knock sensors before I install.
Originally Posted by Viper
Did you get the lower bolts for the valley cover? Good luck.
Thanks, things are looking up now tho. Once the rain settles I'll slap the intake on and a few other things and have it back up and running again.
Originally Posted by mike c.
i do feel for you.i've had many problems,including a blown motor. i feel your pain bro.
New Intake Installed! Finally installed the new intake after assembling it the day before and letting the RTV set. Looks good, happy its in and so far no problems, I havent taken it for a spin yet or put HPTuners on it yet, but I'll do that hopefully tomorrow. I also installed the FAST throttle body at the same time, and the NX MAF plate is on. Once Im satisfied that there are no problems with this, I'll plumb it all to the solenoids and hookup the safety devices for the bottle. Pics to follow. Cyas!
Thats exactly what I did and I was sent a new lower half, just installed it last night and fired it up. I didnt want to worry about possible leaks or lack of flow, so I didnt want to fix the broken one. FAST's price was fair, I thank them again.
Originally Posted by BBQLS1
You can fix it an not worry about it. Use the right epoxy and you will have no worries. Still, I bet if you call FAST, they will sell you what you need if you cry for them.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Pics Well heres a pic of the new intake and TB installed. Very happy with how it looks, cant wait to see how it feels and what most importantly the dyno and track show when all is said and done after a nice tune.
The End (of this sad story, lol)
The End (of this sad story, lol)
TECH Enthusiast
Joined: Apr 2003
Posts: 561
Likes: 0
From: silver Spring MD
Originally Posted by aNuBiS
Well heres a pic of the new intake and TB installed. Very happy with how it looks, cant wait to see how it feels and what most importantly the dyno and track show when all is said and done after a nice tune.
The End (of this sad story, lol)
The End (of this sad story, lol)
Couple of questions - is that the stock MAF or something else? It looks like the bellow between the TB and MAF is the stock one. Is that true? If that is true, you must not have gotten the 90MM TB.
Thanks
Bill
Originally Posted by Bill's 02 Z-28 SS
Hi aNuBiS
Couple of questions - is that the stock MAF or something else? It looks like the bellow between the TB and MAF is the stock one. Is that true? If that is true, you must not have gotten the 90MM TB.
Thanks
Bill
Couple of questions - is that the stock MAF or something else? It looks like the bellow between the TB and MAF is the stock one. Is that true? If that is true, you must not have gotten the 90MM TB.
Thanks
Bill
Its all 78mm stuff, and thats not a stock MAF. Its the Nitrous Express MAF and it is the stock bellow. I do have an aftermarket bellow on the way, because this one will not allow my lid to properly sit over my filter and get latched on now. I started a thread regarding this elsewhere and I had no response as to if this was normal or not. Thanks
aNuBiS