ctd03

Hey guys..well i need a favor. I am going to go ahead and get a true dual exhaust setup put on my car and I am going to get it ran all the way out the back(I HATE DUMPED). But i need pictures of ur setup with comments. Like on ground clearance and mufflers and headers used and describe how its sounds too. Just true duals all the way out the back though.

I need this because I am going with a custom setup and I know i want sweet thunder mufflers but i am going to purchase some x or h pipe and just custom do the rest( not sure if im gonna get headers just yet or what)

But I really really need pictures of setups because i know that there are many ways to take em out the back and I want pictures so that I can model after one of them

Thanks Guys a ton.

And yes I have already looked at all of the true duals on ls1sounds so... i am just asking one last favor

I had been searching for exhaust setups for a while for my 00 WS6 and you guys talked me into custom true duals. Well thanks and I hope that they are as good as you say they are. Thanks for all the comments and support guys.
It is much appreciated

blkZ28spt

Search is your friend. And spring for longtubes!

cyphur

iTrader: (10)

definitely get LT's. and search some more...the pics are out there

MeentSS02

iTrader: (11)

Well, if you have been on LS1Sounds.com, then you must know my pics are already on there. So is all of the other info you requested.

If you haven't heard this in person though, which you seem to indicate you haven't, I would highly recommend it. Yes, this exhaust sounds really nice (to me), but there will always be people out there that don't like it. If you ever need to lay low from the police, this isn't the exhaust for you. You will get all sorts of attention, good and bad.

TheBlurLS1

iTrader: (8)

duals are fine untill you get tired of hearing them when you drive around all the time. my dumped duals get on my nerves sometimes, but i can imagine they would be much more easy on the driver if ran out the back.

Mark A. Rogalski

iTrader: (1)

Click on this link for all the underside pics and product used descriptions:

WS6 True Duals (Pics) - Ceramic, XPipe, After Axle Muffs (Remus), Oval-round, Headers

TheBlurLS1

iTrader: (8)

holy nice system batman!

how did you make/get that oval tubing? i was thinking of doing mine all 3", then flatten it out some, and run it under the axle. my duals are getting annoyingly LOUD.

Brandon Boomhauer

iTrader: (10)

damnit, link doesnt work...

67SS&99SS

iTrader: (7)

Check out my thread, i just posted it up, single chamber under the axle true duals, https://ls1tech.com/forums/generation-iii-external-engine/318000-single-chamber-under-axle-duals.html

cm02WS6

Here's mine...........

https://ls1tech.com/forums/generation-iii-external-engine/294197-finished-my-over-axle-duals-pics-inside.html

MeentSS02

iTrader: (11)

Tossed some more paint on mine: