youd think for $1000 youd get headers that wont lay on the damn kmember
#21
!LS1 11 Second Club
Originally Posted by 8GTOKLR
Common guys this isnt a ford we are talking about you dont rig it lol. The header company should be some what responsible cause they do include research and development in their price...I would bitch but leave them on. I would also email them the picture
It's gotta be an isolated case.
#25
Ummm... was everything back in place when you noticed this/ took the picture? For example, everything tilts down when you undo the trans crossmember because the motor mounts flex... if you havent bolted the trans back up yet, try it and hopefully everything should clear fine.
#26
TECH Senior Member
iTrader: (10)
Join Date: Mar 2003
Location: North Texas
Posts: 8,009
Likes: 0
Received 0 Likes
on
0 Posts
mine used to do that with the stock catback. but when i installed GMMG for some reason they don't touch anymore(kooks weren't moved for the install). i also know my motor mount is bad and there are plans to fix it soon(if i get off my lazy *** for a day). they fit GREAT before my MM went bad. i'd definitely look into that.
Kooks do fit well....but keep in mind they were probably designed around a car w/good motor mounts
Kooks do fit well....but keep in mind they were probably designed around a car w/good motor mounts
#29
On The Tree
iTrader: (4)
Join Date: Jan 2005
Location: munfordville/louisville, ky
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
i just purchased a set of kooks 1 3/4 lts. they should be here by the end of the month. has everyone that has installed the kooks had this problem? just wondering to see if i should send them back and get something else.
#30
!LS1 11 Second Club
Originally Posted by Scully
i just purchased a set of kooks 1 3/4 lts. they should be here by the end of the month. has everyone that has installed the kooks had this problem? just wondering to see if i should send them back and get something else.
#31
9 Second Club
iTrader: (33)
Headers
First post ever on this forum! Always lurking though. I installed a set of 1 7/8 Kooks about a week ago and had the exact same problem on the same side. I just figured when you have such tight tolerances you can expect to do alittle tweaking?! Oh well, I just heated this spot up slightly and put my own little slight bend in so it doesn't make contact. I have all the polly mounts so when the engine torques it doesn't move one bit
#32
12 Second Club
iTrader: (6)
Join Date: Jul 2004
Location: Warrenville, IL.
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
Someone posted last week complaining about Pacesetter's, I remember a few comments "you get what you pay for". My Pacesetter's went in with no clearance issues whatsoever.
Whether you spend $1,000 or $375 on headers there's never a gurantee they are going to fit perfectly. Sure does suck when you fork out that kind of cash you would expect better quality & fittment.
Whether you spend $1,000 or $375 on headers there's never a gurantee they are going to fit perfectly. Sure does suck when you fork out that kind of cash you would expect better quality & fittment.
#34
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Tennessee
Posts: 635
Likes: 0
Received 0 Likes
on
0 Posts
I bought my Kooks 1 7/8" headers over a year ago and they touch the stock k-member also, same location. I called Kook's about it and they basically made me feel like they thought I was lying. Never did get a fix from them. I now have a tubular k-member ready to install so ....
#36
11 Second Club
iTrader: (5)
Join Date: Feb 2005
Location: Destin, FL
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
That is my car in the picture.
I emailed kooks in hopes that they will make some effort to rectify the situation. Obviously this is not the first occurance. I find this grossly unacceptable for a company of their reputation and a part that cost this amount of money.
I emailed kooks in hopes that they will make some effort to rectify the situation. Obviously this is not the first occurance. I find this grossly unacceptable for a company of their reputation and a part that cost this amount of money.
Last edited by lsevenl; 05-18-2005 at 01:44 PM.
#37
TECH Senior Member
iTrader: (10)
Join Date: Mar 2003
Location: North Texas
Posts: 8,009
Likes: 0
Received 0 Likes
on
0 Posts
i've seen cory's car. he had headers on it and they fit fine. PM him and see what kind they were. however, he didn't have a cheap piece on that car(i know, i have his CM spohn lca's). i'd still check the motor mounts.
#38
I had a similar issue with Jet Hots. What was interesting when comparing another 02 WS6 with mine who did not have clearance issue is that our K-members weren't exactly the same. I'm guessing the tolerences of the K-members made by G.M. were quite loose and are party at fault for the erratic issues people are having with Headers.