a lid is a lid. .
Thread Starter
Launching!
Joined: May 2005
Posts: 216
Likes: 0
From: Tucson, AZ
a lid is a lid. . I have done some searching for lids, and I know a lid is a lid. But where do you get them from? any good sites that you guys know about? Do they well them in kits, os everything I need is there or do I need to order other things?
however if you want a new one www.texas-speed.com , www.slponline.com , www.ls1speed.com , just to name a few, have them Sponsors---->
www.ls1speed.com
www.motorsporttech.com
www.thunderracing.com
www.texas-speed.com
www.slponline.com
www.lgmotorsports.com (i believe)
www.lmperformance.com
www.afterthoughtsauto.com (i believe)
That should be enough
www.ls1speed.com
www.motorsporttech.com
www.thunderracing.com
www.texas-speed.com
www.slponline.com
www.lgmotorsports.com (i believe)
www.lmperformance.com
www.afterthoughtsauto.com (i believe)
That should be enough
Trending Topics
!LS1 11 Second Club
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
It's a lid made of plastic. You'll see how simple it is. It's amazing how a simple, crappy poured/molded piece of plastic will give you 10hp.
All of the sponsors are very friendly. Don't hestitate calling them and asking them some questions regarding your purchase.
If anything, you do need a little breather filter to close off that hose that you'll be disconnecting from the passenger side of the stock lid. It's a tiny cone filter that may or may not come with the lid. If it doesn't come with the lid, go to Autozone and search for it in the ricer section. They have it.
So, put the little breather filter on the end of the hose and zip tie that hose off to the side, away from moving parts and belts.
This is going to be the easiest mod that you can do to your car, so don't sweat about it.
All of the sponsors are very friendly. Don't hestitate calling them and asking them some questions regarding your purchase.
If anything, you do need a little breather filter to close off that hose that you'll be disconnecting from the passenger side of the stock lid. It's a tiny cone filter that may or may not come with the lid. If it doesn't come with the lid, go to Autozone and search for it in the ricer section. They have it.
So, put the little breather filter on the end of the hose and zip tie that hose off to the side, away from moving parts and belts.
This is going to be the easiest mod that you can do to your car, so don't sweat about it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Staging Lane
Joined: Sep 2004
Posts: 97
Likes: 0
From: So.California (805)
Originally Posted by SiRgReg23
the slp lid looks the coolest imo ,.... soo go for which one u like cosmetically .. theres some clear ones that are pretty cool too
since we all know a lid is a lid is a lid... IMO a lid should be bought based on...a) the most cosmetically appealing, or
b) the cheapest in price (if money is tight)
fitment of lids can vary even between the same brand, so again i would just consider the 2 factors above when choosing a lid
Staging Lane
Joined: Sep 2004
Posts: 97
Likes: 0
From: So.California (805)
here you go check these lids out...
https://ls1tech.com/forums/appearance-detailing/319454-let-s-see-those-lids.html
see which one you like... or, u might just decide to go lid less like some people
https://ls1tech.com/forums/appearance-detailing/319454-let-s-see-those-lids.html
see which one you like... or, u might just decide to go lid less like some people
If your a Magazine Racer then you'll def. go with the SLP Lid GM High Tech Performance did a test and SLP had best performance, fitment, and finish-however a lid is a lid-fitment is the only real difference other than appearance-
Get whatever you can
Get whatever you can
Originally Posted by ozzykicks2002
yeah Im looking at the TSP smoked on that looks bad ***. anyone here with it remember if it came with all you needed to install?
Mike
