Think I should put a cutout on the car?
Thread Starter
Launching!
Joined: Aug 2004
Posts: 236
Likes: 0
Think I should put a cutout on the car? My current setup is TTS Longtubes into 2.5in Y pipe with high flow cats into 3in I pipe back into 2.5in rumber out the back. Would it be worth it to put a cutout in the I pipe since its going back and forth size to size. You can see my #s in my sig.
You already have the rumbler, I wouldn't bother. It might be worth 1-2 rwhp. I've seen dynos of guys with a magnaflow only gaining a couple hp through a cutout, and the rumbler is less restrictive than the magnaflow. Cutout's are cheap though. 
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Redneck Z
You already have the rumbler, I wouldn't bother. It might be worth 1-2 rwhp. I've seen dynos of guys with a magnaflow only gaining a couple hp through a cutout, and the rumbler is less restrictive than the magnaflow. Cutout's are cheap though.
