90mm tb setup help
90mm tb setup help im runing a big inch ls1 with a 90mm intake , 90mm tb , 85mm MAF now my question is should i run the 75mmlid wich i have now or go to the TSP 85mm lid, if i keep my 75mm lid whats hould i use for a bellow to go from the 85mm maf to the 75mm lid
Originally Posted by 1984camaroz28
im runing a big inch ls1 with a 90mm intake , 90mm tb , 85mm MAF now my question is should i run the 75mmlid wich i have now or go to the TSP 85mm lid, if i keep my 75mm lid whats hould i use for a bellow to go from the 85mm maf to the 75mm lid
TECH Enthusiast
Joined: Apr 2003
Posts: 561
Likes: 0
From: silver Spring MD
Hi Guys
I used my 75mm lid with a clamp from Home depot - I think it was a 3.5 metal clamp (clamps attached to the unit). I removed the rubber piece and attached the 85mm MAF with the Lid. The inside diameter appeared to be the same as the MAF. I just butted them together and clamped.
Bill
I used my 75mm lid with a clamp from Home depot - I think it was a 3.5 metal clamp (clamps attached to the unit). I removed the rubber piece and attached the 85mm MAF with the Lid. The inside diameter appeared to be the same as the MAF. I just butted them together and clamped.
Bill
Trending Topics
LS1TECH Sponsor
iTrader: (33)
Joined: Jul 2002
Posts: 4,399
Likes: 0
From: Out on the farm in Central IL
Just installed the Fast 90, NW TB, 85MM Maf and lid. It all fit very well and the car started right up. It really needs a tune and I will get that at Speed Inc. on 7/15. It is running VERY rich right now. I went through almost 1/4 tank in about 35 miles.
You can hear the car breath with this setup. Sounds like a jet engine pulling air.
Will post tune results after the 15th.
You can hear the car breath with this setup. Sounds like a jet engine pulling air.
Will post tune results after the 15th.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by Steve Burger
...You can hear the car breath with this setup. Sounds like a jet engine pulling air.
I'm running the same exact setup and I couldn't get over just how much air this thing moves...I'm afraid to stand too close as I might get sucked in!
Teching In
Joined: Jun 2005
Posts: 26
Likes: 0
I have NO experience modding an LS1 so I may be simplifying this too much. How can a 90mm TB and 90mm intake make much improvement if all the air has to go thru an 85mm MAF first? Won't this create too much of a bottleneck to realize much improvement?
Thx
Thx
LS1TECH Sponsor
iTrader: (33)
Joined: Jul 2002
Posts: 4,399
Likes: 0
From: Out on the farm in Central IL
The stock MAF and Lid are 75MM. the 85MM maf and lid are HUGE compared to stock stuff.
Yeah, all things being equal the MAF and Lid are still a little bit of a restriction. I don't think they will be much of an issue though.
Yeah, all things being equal the MAF and Lid are still a little bit of a restriction. I don't think they will be much of an issue though.
