Check this out before spending $$$ on a catch can!
Thread Starter
On The Tree
Joined: Apr 2005
Posts: 128
Likes: 0
From: Odessa, Texas
Check this out before spending $$$ on a catch can! The part on the left in the pic below is GM part #12572717 and the part on the right is the OEM pcv for LS1's. Notice the much smaller hole in the new fitting. I'd like to give credit to bigdsz for helping me and telling me about this part.
Here is his quote: About 4 or five years ago I put on a truck pcv fitting on my car, I won't call it a valve, because it was not.All it was, was the same length as the OEM PCV valve but the hole was smaller in diameter. I got it at the local Chevy dealer. It eliminated my oil consumption problems. I've got 80,000 miles on my car now, heavily modded, and use no oil.All this catch can stuff is BS in my opinion. :end quote
When I was at the GM parts house I found out that this part is now listed in there system as a LS1 pcv replacement to prevent oil consumption. It only cost me $5.93. That's alot better than $160 for a catch can.
Hope this helps any of you guys on a budget like me. 
Also a big thanks to bigdsz for the help. 
Here is his quote: About 4 or five years ago I put on a truck pcv fitting on my car, I won't call it a valve, because it was not.All it was, was the same length as the OEM PCV valve but the hole was smaller in diameter. I got it at the local Chevy dealer. It eliminated my oil consumption problems. I've got 80,000 miles on my car now, heavily modded, and use no oil.All this catch can stuff is BS in my opinion. :end quote
When I was at the GM parts house I found out that this part is now listed in there system as a LS1 pcv replacement to prevent oil consumption. It only cost me $5.93. That's alot better than $160 for a catch can.
Hope this helps any of you guys on a budget like me. Also a big thanks to bigdsz for the help. Thread Starter
On The Tree
Joined: Apr 2005
Posts: 128
Likes: 0
From: Odessa, Texas
ya i was gonna get a catch can too before bigdsz told me about this part. I give all the credit to him. I'm not sure many people know about it, so I just thought I'd try to spread the word a little. Hope this dosen't hurt any of the sponsers. haha
Trending Topics
Thread Starter
On The Tree
Joined: Apr 2005
Posts: 128
Likes: 0
From: Odessa, Texas
The guy at the parts department said that it looks like it would go on a truck also. That was just an opinion though and he didn't say what kinda truck. sorry. I did see on the monitor myself that, that part # was for oil consumption problems. And for under 6 bucks it isn't much of a loss if it dosen't work. And I'm pretty sure it wouldn't make the problem any worse. It is the exact same size as the OEM pcv. I already put it on the car no problem.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
On The Tree
Joined: Apr 2005
Posts: 128
Likes: 0
From: Odessa, Texas
Originally Posted by Redneck Z
Has anybody heard of any negative effects?
Originally Posted by dajodsterman
I guess there could be the posability of it ruining the main seals. I don't think GM would have this part as a fix if it would do that though. Then again GM engineered a poor system in the first place.
That sounds like a pretty BIG negative to me.
Originally Posted by Redneck Z
Has anybody heard of any negative effects?
I remember some guys where mounting them verticly to try and get them to work but they where making all kinds of funny noises mounted like that.
Yep that the pcv valve out of the trucks. I think they are in all the trucks now but I'm not sure. It's not going to hurt your main seals. With the amount of trucks that have this valve I have seen very few with main seal leaks.
I'll give it a shot. i've got a catch can and it catches an easily noticeable amount of oil every 5000 mi when I change my oil. I'll swap it out next oil change and see what the can looks like after 5000 mi
Last edited by FstBlkz28; Oct 11, 2005 at 02:44 PM.
Launching!
Joined: Nov 2004
Posts: 281
Likes: 0
I think they are in other cars as well, besides trucks, at any rate I installed one 10,000 miles ago and have had no ill effects. My engine does use less oil. I wasn't sure how much, but found out when I ported my stock throttle body. It was caked in oil all throughout that thing, and now several thousand miles later the TB looks like it did when I cleaned up all the oil and sanded it down-no oil residue at all, so it must be working. I thought the oil consumption was causing detonation as I could here it clacking on acceleration, this was in California, then I moved to Michigan and the problem disappeared-must have been the gas. Just thought I'd mention this since I've read many people blaming it on the oil consumption.