Slowhawk

iTrader: (12)

Does anyone know what Ford truck uses these?
I know they are 21/2 and 3" clamps.

Nine Ball

iTrader: (38)

I hear the powerstroke diesels use the 3". No trucks use the 2.5"

I got a set from FLP when a nasty speedbump took mine out.

Tony

gator's 99TA

iTrader: (2)

what is a v-clamp? just wondering. i have dynatechs.

Slowhawk

iTrader: (12)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Nine Ball:
<strong>I hear the powerstroke diesels use the 3". No trucks use the 2.5"

I got a set from FLP when a nasty speedbump took mine out.

Tony</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">FLP is backordered till ?????.I just wanted some spares,just incase.
FLP is the only one that usses V-clamps.

LEO

iTrader: (3)

You can get the 3" V-band clamps @ a Ford Dealership. They are for a '96 F350 turbo diesel, they cost about $12 a piece from Ford and about $25 a piece from FLP - your choice. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />

Onyx LS1

iTrader: (5)

you can get them from Dynatech also

LEO

iTrader: (3)

I believe Dynatech makes the 1 3/4" headers for FLP.

BIGBOS

The ford price seems a lot better, now I know where I will go to get them, the sizes are different on the FLP's though, the fronts are 3" and the rears look a little smaller... <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

Slowhawk

iTrader: (12)

The rear are 2 1/2".That will be the harder to get.Anyone know where to get these other than FLP?
I'm going to Ford and get 4 3" for future use.

Elite_Hot_Rod

SlowHawk,

Why don't you try to go directly to the manufacturer? I just got a set earlier this month from FLP after the damn speed bump ate mine. I wrote down all the info off the clamps for future reference. The clamps are manufactured by R.G. Ray Corporation, Buffalo Grove, Illinois. The 2.5" clamp PN# is 50380 and the 3" clamp PN# is 50381. Call information get their number and give it a shot, can't hurt. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Mark

RyanJ

will the clamps from burns stainless work on an FLP pipe?

mattf2

If you do get that info, let us know.

LEO

iTrader: (3)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by The Judge:
<strong>will the clamps from burns stainless work on an FLP pipe?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">No.

Slowhawk

iTrader: (12)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Elite_Hot_Rod:
<strong>SlowHawk,

Why don't you try to go directly to the manufacturer? I just got a set earlier this month from FLP after the damn speed bump ate mine. I wrote down all the info off the clamps for future reference. The clamps are manufactured by R.G. Ray Corporation, Buffalo Grove, Illinois. The 2.5" clamp PN# is 50380 and the 3" clamp PN# is 50381. Call information get their number and give it a shot, can't hurt. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

Mark</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I'll lok into this <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

dustnu

what type of gasket are you using for this style clamp and part#

dustnu

and how do the seal compared to other stylee clamps?

dustnu

does anybody know? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

Superman

Why not just call FLP. 630-820-9294

Tin Indian

Here is a wb site for all types of V-Band clamps manufactured by RG Ray

http://www.thehansoncompany.com/rgray%20main.html