PaceSetter install?
PaceSetter install? Anyone have a link to an install guide? I'm putting longtubes in this friday on my 01 TA and I just wanted to look through everything. I've done a ton of searching but didn't find a step by step how-to.
Its in the sticky... you know, the one that says "please read before posting"
http://www.geocities.com/foff667/98Camaropg4.html
http://www.geocities.com/foff667/98Camaropg4.html
I can do a set of pacesetters with the front wheels about 5 inches off the ground if even, they are easy as pie
pull coil packs plugs and wires
disconnect o2 sensors,
pul y pipe
unbolt manifolds
put headers in
get bolts started, install y pipe,
tighten header bolts down
reinstall o2s
put coil packs plugs wires back
start it up, check for leaks
wlet that bitch smoke with the hood up for a few minutes
drive it like you stole it
pull coil packs plugs and wires
disconnect o2 sensors,
pul y pipe
unbolt manifolds
put headers in
get bolts started, install y pipe,
tighten header bolts down
reinstall o2s
put coil packs plugs wires back
start it up, check for leaks
wlet that bitch smoke with the hood up for a few minutes
drive it like you stole it
