A/C Out!
#21
12 Second Club
Thread Starter
Join Date: Feb 2005
Location: Gas Station
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah I just cut that belt with razor blade. Took compressor off, all bolts and tubes. Yeah now I have some pulleys there that are not used.. the ones ur talkin about. I was thinking about removing them too... dead weight.
Thanks
Thanks
#22
That's what she said...
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
There should be an idler pulley, and a tensioner pulley you can remove. They are the narrow ones the A/C belt used to run on.
I you feel like taking the dash apart a little, you should be able to remove the evaporator, which is what those lines going into the cabin of the car run to.
I you feel like taking the dash apart a little, you should be able to remove the evaporator, which is what those lines going into the cabin of the car run to.
#23
12 Second Club
Thread Starter
Join Date: Feb 2005
Location: Gas Station
Posts: 339
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah Ill take those pulleys off. I think they are mounted by only one bolt each. AS far as evaporator I will take the dash off because I want to get rid of heater core, might as well do it at the same time. Most likely I will post about it later.. with questions. ![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Thanks Fellas
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Thanks Fellas