Cutout - cable or motor options?
Thread Starter
Teching In
Joined: May 2002
Posts: 22
Likes: 0
From: Snellville, Georgia
Cutout - cable or motor options? I have seen and heard of cut-outs that have a motor or cable that allows you to open up the cut-out without crawling under the car. Anybody know a vendor or have a link?
It's not that I don't want to crawl under the car, but I don't want to crawl under the car. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
It's not that I don't want to crawl under the car, but I don't want to crawl under the car. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
Re: Cutout - cable or motor options? There is a cable operated cutout available from Mr. Gasket. Its $47 and you can get it from Jegs. (bottom of pg15-M of their current catalog, online also)
There are two electric cutouts as well:
* One is from QTEC and is available from Quick Time Performance. QTP is a sponsor of this site. The link is available at the right--->.
Its roughly $150.
* The other electric cutout is made by McCord and available on his site (http://www.mccordcg.com/mpp/mpp.htm).
Its roughly $100.
I dont own any of these and cannot comment on their quality. Maybe someone else can help you there.
--VIP1
There are two electric cutouts as well:
* One is from QTEC and is available from Quick Time Performance. QTP is a sponsor of this site. The link is available at the right--->.
Its roughly $150.
* The other electric cutout is made by McCord and available on his site (http://www.mccordcg.com/mpp/mpp.htm).
Its roughly $100.
I dont own any of these and cannot comment on their quality. Maybe someone else can help you there.
--VIP1
On The Tree
Joined: Feb 2002
Posts: 112
Likes: 0
From: Arlington, VA
Re: Cutout - cable or motor options? [QUOTE]Originally posted by RedSS:
[QB]I have the quicktime works good.
I'm thinking of getting one, just wondering, how does the wire run inside the car? If you could send me any more pics, like where you mounted the switch, I would appreciate it. jules301h@comcast.net
[QB]I have the quicktime works good.
I'm thinking of getting one, just wondering, how does the wire run inside the car? If you could send me any more pics, like where you mounted the switch, I would appreciate it. jules301h@comcast.net
TECH Addict
Joined: Apr 2002
Posts: 2,417
Likes: 0
From: Waldwick, NJ
Re: Cutout - cable or motor options? My favorite saying is "Buyer Beware, you get what you pay for"
from what I read numerous times, is that QTEC mkes a very high quality item and Mccleod has a tendancy to break. So m advice it to go wih QTEC, from what I read great quality, great customer support and just great people.
from what I read numerous times, is that QTEC mkes a very high quality item and Mccleod has a tendancy to break. So m advice it to go wih QTEC, from what I read great quality, great customer support and just great people.
TECH Addict
Joined: Apr 2002
Posts: 2,417
Likes: 0
From: Waldwick, NJ
Re: Cutout - cable or motor options? Oh yeahi'll be ordering 3 QTECs once I get my exhaust, one for me, one for my friend and one for my girlfriend <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> ....Hey Barry have you ever put one on a 96 V6 Mustang, how does it sound, my GF likes loud cars and I told her about you, and I told my friend he has to get one when I get one from you. <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Apprentice
Joined: Apr 2002
Posts: 315
Likes: 0
Re: Cutout - cable or motor options? There is a groumet right by the cutout under the rear seat. Take out the rear seat and consel fish the wire through. Drill a 1/2" hole in the ashtray
becareful its more britlle than plastic. Hook up the wires put it all back together and you done!!!
<img src="http://home.attbi.com/~ss_driver/switch2.jpg" alt=" - " />
<img src="http://home.attbi.com/~ss_driver/switch.jpg" alt=" - " />
<small>[ July 19, 2002, 02:25 PM: Message edited by: RedSS ]</small>
becareful its more britlle than plastic. Hook up the wires put it all back together and you done!!!
<img src="http://home.attbi.com/~ss_driver/switch2.jpg" alt=" - " />
<img src="http://home.attbi.com/~ss_driver/switch.jpg" alt=" - " />
<small>[ July 19, 2002, 02:25 PM: Message edited by: RedSS ]</small>
Thread Starter
Teching In
Joined: May 2002
Posts: 22
Likes: 0
From: Snellville, Georgia
Re: Cutout - cable or motor options? Too cool. I believe I will put mine to the side and not directly to in the middle of the ash tray in case I come up with some James Bond add on.
TECH Senior Member
Joined: Nov 2001
Posts: 8,423
Likes: 0
From: Friendswood,TX
Re: Cutout - cable or motor options? http://www.quicktimeperformance.com/ is the best!!!! Talk with Barry and get your QTEC!!! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Thanks again Barry and I will get you an MPEG of it soon. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<small>[ July 19, 2002, 02:19 PM: Message edited by: Toxic Texan ]</small>
Thanks again Barry and I will get you an MPEG of it soon. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<small>[ July 19, 2002, 02:19 PM: Message edited by: Toxic Texan ]</small>
Thread Starter
Teching In
Joined: May 2002
Posts: 22
Likes: 0
From: Snellville, Georgia
Re: Cutout - cable or motor options? I assume any kind of switch could be wired in? Is it just a regular on/off two wire switch or something more complex(not that I'm a electrician or even play one on TV)?
Re: Cutout - cable or motor options? Thanks for the kind word <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I have them on Mustang GTs but not on a V6 stang. I do have one on my GTP which is a 6 banger and sounds good.
Anyone have any questions feel free to call me.
I have them on Mustang GTs but not on a V6 stang. I do have one on my GTP which is a 6 banger and sounds good.
Anyone have any questions feel free to call me.