WILWAXU

iTrader: (6)

Looks like a rip off of the old titan & K&N FIPK.

For the price you can have a Lid.. Carbon Fiber one at that. It would look better and based on what we've seen with the FIPK, the lid will out perform it.

rnr27band1

hmm, it dosent look very promising, i mean if it was good wouldnt some sponsors carry it? just get a lid.

wojan

Actually, I emailed the guy and he said that they just completed this product. I'm having him send me scans of the dyno results. I'll keep you posted.

Wojan

Fenris Ulf

I highly doubt the performance claims unless they are talking about gains over the STOCK lid <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

wojan

Anyone have one of these??
Anyone doen independant Dyno tests?

http://cgi.ebay.com/ebaymotors/ws/eb...oDisplayType=2

pbperformance

my scanner is down right now but as soon as i can get these dyno sheets scanned ...... any one that would like to see the results please send me an email . i have results on three different cars and three different setups . my email address is poorboysperformance@ev1.net

383ss

iTrader: (14)

post the dyno results if you would. and please clarify on if it's over an aftermarket or stock lid. thanks.

1CAMWNDR

iTrader: (21)

Even if those hp# claims are correct, that doesn't look like it is worth $190 to me. <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />
If I was in the market for that kind of intake system, I might pay $135 for it. And is that intake tube aluminum?? How will that work for folks with an 85mm MAF??

pbperformance

its actually a mandrel bent 30 degree 3.5" steel tube thats been high temp powder coated inside and out . the couplers measure 3.65" so i would say they should fit the larger maf and larger throttle bodies . the filter is a 3.5 outlet and flows as much and more than any lid/filter/ram air setup on the market. we didn't build the kit for looks as much as function. this kit will make hp gains over a lid with the hood up/down/off or whatever. we don't need a leaf blower or a large fan to make power. if anyone is interested in seeing dyno results please email me . thanks - mike @ poorboys performance

pbperformance

its actually a mandrel bent 30 degree 3.5" steel tube thats been high temp powder coated inside and out . the couplers measure 3.65" so i would say they should fit the larger maf and larger throttle bodies . the filter is a 3.5 outlet and flows as much and more than any lid/filter/ram air setup on the market. we didn't build the kit for looks as much as function. this kit will make hp gains over a lid with the hood up/down/off or whatever. we don't need a leaf blower or a large fan to make power. if anyone is interested in seeing dyno results please email me . thanks - mike @ poorboys performance

ZYA_LTR

Ok, not to bash anyone, but this kit could be made at home for pretty cheap:

Mandrel bend----$30
silocone/rubber couplings-----$60 pr/$30 pr
K&N filter----------$50
Powder coating------$15 to 20
(not needed, paint will do fine)

so for $150 on the high end, you can build your own, budget boys could build one for closer to $100.

Jason