Reinstalling stock pulley...
Thread Starter
11 Second Club
Joined: Nov 2001
Posts: 300
Likes: 1
From: Central Florida
Reinstalling stock pulley... I have a buddy I'll be doing a cam for soon. He wants to avoid the cost of going with the ASP underdrive pulley. I have never done a cam without installing an ASP, so I don't know how to get them back on. I've read that they have to be heated to expand and get them to fit over the crank snout. Can someone please elaborate for me? Thanks in advance...
TECH Addict
Joined: Dec 2001
Posts: 2,907
Likes: 1
From: Bergen County, NJ
Re: Reinstalling stock pulley... You should be able reinstall it using the standard procedure. There is a GM tool to guide it on straight and then they recommend that you use the old bolt to pull it on, and a new one for the final tightening sequences.
TECH Fanatic
Joined: Dec 2001
Posts: 1,060
Likes: 0
From: MI
Re: Reinstalling stock pulley... </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by DaddySS:
<strong> You should be able reinstall it using the standard procedure. There is a GM tool to guide it on straight and then they recommend that you use the old bolt to pull it on, and a new one for the final tightening sequences. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thats the way I did mine when I did my cam swap.
<strong> You should be able reinstall it using the standard procedure. There is a GM tool to guide it on straight and then they recommend that you use the old bolt to pull it on, and a new one for the final tightening sequences. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thats the way I did mine when I did my cam swap.
