mac header install?
Thread Starter
TECH Apprentice
Joined: Dec 2002
Posts: 374
Likes: 0
From: Richwood texas
mac header install? can any one point me in the right direction on how to install my mac headers on my 00 z28 i will be greatful of all replys <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
On The Tree
Joined: Nov 2001
Posts: 130
Likes: 0
From: Ashville,Alabama
Re: mac header install? Did mine this weekend solo. Valve cover and coilpacks on the passenger side - header thru the top. Oil filter removed and casting block cut off - header thru the bottom on the driver's side. Patience and take your time!!!! Mine is an 2002, no EGR made it a tad bit easier.
Thread Starter
TECH Apprentice
Joined: Dec 2002
Posts: 374
Likes: 0
From: Richwood texas
Re: mac header install? off road y on jackstands also do i need to buy o2 wires that r longer if so cant do it till next week so please tell me i dont <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Trending Topics
Teching In
Joined: Dec 2001
Posts: 37
Likes: 0
From: Richmond,Va.
Re: mac header install? Go to install university. I have the macs and love them!I have the install info on my laptop but do not know how to post it.It will take about 8 hours since i guess its your first time installing these headers. You have to remove the coil packs and valve covers,You also have to jack up the motor unless you can grind the block on the passenger side. drivers side is easy!
The install is not to bad just time consuming.You should change your plugs while doing this install,which i'm sure you've been told!I also got new manifold gaskets from the dealer,I know you can reuse the old gaskets ,but I think this is why guys have problems with bolts working loose!
The install is not to bad just time consuming.You should change your plugs while doing this install,which i'm sure you've been told!I also got new manifold gaskets from the dealer,I know you can reuse the old gaskets ,but I think this is why guys have problems with bolts working loose!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Re: mac header install? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by N2Ofreak:
<strong> Go to install university. I have the macs and love them!I have the install info on my laptop but do not know how to post it.It will take about 8 hours since i guess its your first time installing these headers. You have to remove the coil packs and valve covers,You also have to jack up the motor unless you can grind the block on the passenger side. drivers side is easy!
The install is not to bad just time consuming.You should change your plugs while doing this install,which i'm sure you've been told!I also got new manifold gaskets from the dealer,I know you can reuse the old gaskets ,but I think this is why guys have problems with bolts working loose! </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">jack the motor up? are you kidding me?? damn...well im putting my MAC's on this weekend, through the top with the coil packs and valve covers off....letcha know how it goes. I'll have 4 people workin with me with full access to every tool, impact tools, and a lift. should be easy
<strong> Go to install university. I have the macs and love them!I have the install info on my laptop but do not know how to post it.It will take about 8 hours since i guess its your first time installing these headers. You have to remove the coil packs and valve covers,You also have to jack up the motor unless you can grind the block on the passenger side. drivers side is easy!
The install is not to bad just time consuming.You should change your plugs while doing this install,which i'm sure you've been told!I also got new manifold gaskets from the dealer,I know you can reuse the old gaskets ,but I think this is why guys have problems with bolts working loose! </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">jack the motor up? are you kidding me?? damn...well im putting my MAC's on this weekend, through the top with the coil packs and valve covers off....letcha know how it goes. I'll have 4 people workin with me with full access to every tool, impact tools, and a lift. should be easy
