Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Spraying out the radiator reserve

Thread Tools
 
Search this Thread
 
Old 06-24-2006 | 12:18 AM
  #21  
ChocoTaco369's Avatar
Tech Resident
 
Joined: Jan 2006
Posts: 5,117
Likes: 2
From: Philly
Default

Originally Posted by TheBlurLS1
If it is a blown head gasket, now's the perfect time for a set of $900 TSP CNC'd heads.
and pistons, and install, and a tune...this is gettin' pricey for the dood, dood
Old 06-24-2006 | 12:55 AM
  #22  
strokedls1's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Nov 2002
Posts: 1,829
Likes: 0
From: Venice, Ca
Default

I have seen ls1's make great power, but blow coolant on high rpm passes. It is definately a blown head gasket. Doing the pressure test on the cooling system is the easy way to figure out if the gaskets are leaking.
Old 06-24-2006 | 02:27 AM
  #23  
BLK02TA's Avatar
TECH Fanatic

iTrader: (11)
 
Joined: Feb 2006
Posts: 1,123
Likes: 0
From: Fort Knox, KY
Default

Originally Posted by strokedls1
I have seen ls1's make great power, but blow coolant on high rpm passes. It is definately a blown head gasket. Doing the pressure test on the cooling system is the easy way to figure out if the gaskets are leaking.
You talkin to me or him? If it was a blown headgasket wouldnt the coolant be low?
Old 06-24-2006 | 11:18 AM
  #24  
99HARDTOP99's Avatar
Teching In
 
Joined: Jun 2006
Posts: 10
Likes: 0
From: Atlanta
Default

yeah dont know if i can help ya there. If nothinng is leaking or spraying anywhere i wouldnt worry about it. What happens when you run your car hard for 5 mins or so? I mean do you smell it worse then or still nothing? Just to ease your mind you could get a compression check done just in case.
Old 06-24-2006 | 11:51 AM
  #25  
strokedls1's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Nov 2002
Posts: 1,829
Likes: 0
From: Venice, Ca
Default

Originally Posted by BLK02TA
You talkin to me or him? If it was a blown headgasket wouldnt the coolant be low?
I was talking to him. If your radiator is low then you know you have a problem. Pressure test the cap and system to make sure no issues are present. If you need a new cap try to get a stant. Otherwise maybe a good idea to buy an lt1 radiator. It has twice the capacity of a ls1 radiator, but have the exact same external and mounting dimensions. You just need to block off the heater core connections.
Old 06-24-2006 | 12:37 PM
  #26  
Shoulder Shaker's Avatar
TECH Apprentice
iTrader: (36)
 
Joined: Feb 2004
Posts: 377
Likes: 0
From: Wayne, MI
Default

Yeah it sounds like a blown head gasket. I had the same problem last year. The car would run fine until I get on it hard. THe temp would shoot up and coolant would sprew all over the engine. I tried burping the system and the same results. I took it to a dealership and they performed a test to see it any exhaust was getting into the coolent and BAM that was the problem. So they told me I had 1 of 3 problems. Crack block , cracked heads, or blown gaskets. I tore the motor down and we found that the gaskets did appear to be worn to say the least. Well I have just been able to replace everything so I will be able to advise in a few days if this indeed fixed the problem. Good luck on getting the problem solved.
Old 06-24-2006 | 12:54 PM
  #27  
WS6nJAX's Avatar
Restricted User
iTrader: (207)
 
Joined: Aug 2005
Posts: 555
Likes: 0
From: jacksonville, fl.
Default

i had the same problem a few weeks ago with the violent overflows at the coolant reservoir. mine ended up being 2 problems. a sticking stat and my secondary fan speeds not coming on after a hard run or highway speeds. i replace the stat and reset the fans for the stat and everything is fine now.




All times are GMT -5. The time now is 08:34 AM.