KW4life06

iTrader: (12)

transamws6 do you have closer pics of your xpipe under the tunnel brace? also does you have a DSL on it?

transamws6_97

iTrader: (5)

yes i have a dsl and that's all the pictures I have so far I'll try to crawl under the car next weekend and get some more pics. It's really hard to see the x pipe w/ the crossmember in the way

KW4life06

iTrader: (12)

ya I understand. I just plan on running a very similar setup and want to see how tight of a fit it is

badass99ss

iTrader: (17)

Here are my true duals w/ single chambers.

LTLRDSS

iTrader: (2)

single chambers ftmfw. nice set up, i would take the dumps off and put tip on it. check out my single chamber td's a few pages back

badass99ss

iTrader: (17)

Ya I love the sound of single chambers. My 69 Chevelle has the dumps like yours, sounds bad *** but it's loud in the car. I'm going back to the shop to move the mufflers and tuck the tips back up under the bumper. I thought I would give this a try but im not really diggin it. Here is a sound clip!

http://www.youtube.com/watch?v=HfeMXKFwUNg

Arc00TA

iTrader: (17)

Heres my contribution: I got sick of my LM1 with the LT's on, and I was browsing the western section and came across a thread about a "getto" TD setup. Well I liked it a lot for the price and ended up doing something similar at the same shop. I have Flowtech LT's into an H pipe , then moroso spiral flows, 3" all the way. I have no tips on it yet but the pipes run out the back in the stock location. Whats so ghetto about this you may ask? Under the axle pretty much sum it up, but I couldn't be happier with it. It cost me about $400 total, sounds very nice and I definitely noticed a difference over the LM. My only complaint is that its pretty quiet. For the person that will say something about it, yes they are crush bends and I don't care.








Idle clip (yeah you got my plate, so sue me)


Freeway merge at about 3/4 throttle

transamws6_97

iTrader: (5)

no offense but that clearance sucks...

Arc00TA

iTrader: (17)

You should have seen it on sportlines

transamws6_97

iTrader: (5)

lol you are a brave man for that and sportlines

RippinZ121

iTrader: (16)

man that is kind of quiet. i have the tsp td's with the spiral flows and i wanted it loud...o well. doesnt sound bad though it has good tone

Sgt. Spuds

iTrader: (1)

What would be a small muffler good for a dumped td system that is realitivly quiet with a great sound still?

SOM WS9

Moroso Spiral Flows all the way if you want it quiet. They are pretty tame at idle and cruise, but they scream at WOT. Great sound quality and nice noise level IMO...though I do wish it was louder now and then so I open up the cutouts.

bww3588

iTrader: (49)

id like to see someone put some Flowmaster Hushpower II's under there and see what it sounds like.

SOM WS9

I've wanted to hear those on an F-body too. I'm sure someone has used them on a Gen III truck by now. There has to be a sound clip out there somewhere.

01ssreda4

iTrader: (96)

going on this weekend i hope.

Full-Force

iTrader: (11)

This is a crappy job, but this is what the profile of your kit will end up looking like. I have used your kit to build many setups.

01ssreda4

iTrader: (96)

^^^^your a funny guy. yes i realize it wont fit as it comes out of the box. lol you crack me up. i saw a bunch of pictures and figured i would be cutting and welding a little. good thing i didn't up and decide to weld it together before i test fit it huh?

edit: i am gonna put some sound clips up when i get it on as well as some pics. before and after.

slmdLS1

iTrader: (8)

Walkaround....
http://www.youtube.com/watch?v=qvMRQzEBLWM

Interior "cabin" noise...
http://www.youtube.com/watch?v=seVbuBnF9jo

pulling it out of the office....
http://www.youtube.com/watch?v=-GTEQO5esBc

drive by...
http://www.youtube.com/watch?v=cp12_6P_sUM

drive by return...
http://www.youtube.com/watch?v=aGZtRuI5zRs

pulling back in....
http://www.youtube.com/watch?v=hCpej3w96n4

LTLRDSS

iTrader: (2)

heres afew sound clips of my set up

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]