the rest is true! lol 
Off road Y pipe for Ebay headers
Originally Posted by Specialized
I usually notice the average LS1 Fbod guy is similar to me. Built, 6 foot or taller, Shorter hair, stern(ish) face.
Here is what I have in my custom Y pipe. All prices are from Summit due to their unique nature.
Pipe...free, had it laying around
Flowmaster Scavanger Series Y Collector, 2x3 inch into 1x3.5 inch pipe...$48.99
Summit 3.5 inch manual cutout...32.95
Flowmaster 3 1/3 to 3 inch reducer (came with 2, other is going on after the 3.5 inch downpipe on my little turboFord)....$21.88
Shipping...8.95
The total cost for me to make my own Y pipe turned out to be $112.77. I know that the price seems high to fabricate something yourself, but I feel the fit quality and flow characteristics exceeds anything that I could have purchased pre-made.
Oh yea, it took me at least 6 hours of cuting and welding mandrel bends to get it right. I don't do this very often and only had a 14 inch Harbor Freight cutoff wheel, an air grinder, a 3 inch air cutoff wheel and a Lincoln Weldpac 100 at my disposal. Life would have been much easier with a bandsaw to cut the pipe!
Good luck!
Galen
Pipe...free, had it laying around
Flowmaster Scavanger Series Y Collector, 2x3 inch into 1x3.5 inch pipe...$48.99
Summit 3.5 inch manual cutout...32.95
Flowmaster 3 1/3 to 3 inch reducer (came with 2, other is going on after the 3.5 inch downpipe on my little turboFord)....$21.88
Shipping...8.95
The total cost for me to make my own Y pipe turned out to be $112.77. I know that the price seems high to fabricate something yourself, but I feel the fit quality and flow characteristics exceeds anything that I could have purchased pre-made.
Oh yea, it took me at least 6 hours of cuting and welding mandrel bends to get it right. I don't do this very often and only had a 14 inch Harbor Freight cutoff wheel, an air grinder, a 3 inch air cutoff wheel and a Lincoln Weldpac 100 at my disposal. Life would have been much easier with a bandsaw to cut the pipe!
Good luck!
Galen
Originally Posted by jimmypop13
LOL at the pants the driver was wearing, i'm guessing he's into the goth thing
https://ls1tech.com/forums/generation-iii-external-engine/637662-all-xs-stainless-steel-headers-questions-here.html
That has all my soundclips no there and its about to have a fresh sound clip of a cold start, idle and 3k rev. Also got lots of pics up and Im willing to take more if you just name what you wanna see
***oo while im thinking about it id like to thank jason for posting up my links for me
Originally Posted by Tainted
while im thinking about it id like to thank jason for posting up my links for me
Originally Posted by WS6NIGHTMARE
No problem...Id laugh too if saw Charlie hoppin out of that car at a meet, but Im not 6' and built either....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by jcolews6
where can I get the cats for 45 bucks ? Thanks
Originally Posted by Tainted
lol not by a longshot. I got some hot topic clothes but I just like them over the whole prep look. I'll normally take clothes from there chop them up and make something different outta them jsut to be a little different. But anyhow
https://ls1tech.com/forums/showthread.php?t=637662
That has all my soundclips no there and its about to have a fresh sound clip of a cold start, idle and 3k rev. Also got lots of pics up and Im willing to take more if you just name what you wanna see
***oo while im thinking about it id like to thank jason for posting up my links for me
https://ls1tech.com/forums/showthread.php?t=637662
That has all my soundclips no there and its about to have a fresh sound clip of a cold start, idle and 3k rev. Also got lots of pics up and Im willing to take more if you just name what you wanna see
***oo while im thinking about it id like to thank jason for posting up my links for me
Originally Posted by Super Speed
Can I get a video of a drivebye and an in car 1/4 mile? Thanks!
I can get a drivebye video in the yard no problem but on the road and track is a problem. no front bumper= not street legal yet. This car is being rebuilt from a total loss so keep that in mind. Ive also NEVER been to a race track but I will get a driveby for you
Originally Posted by Tainted
dont hold your breath, they said it was commnig out 4 months ago i got tired of waiting. hell the damn thing might not even fit as good as the jet hot one does anyhow
Originally Posted by Country Boy
just got the new one in yesterday... theyre just waiting on final fitment OKs from my Dad. Stuff take time, buy what you want.
lol i already did
Originally Posted by Ripper415
is it just me or does that y pipe seem to have much larger indented areas than most other y pipes i've seen. i would think that would really hurt the airflow and rob some power.
its not flat. Just dented for the frame rails. Might be able to put it on this weekend. If they folllowed the mock up, it fits like a glove. BTW~ he has their new "race" headers too he'll be swaping out 
