What Bolt-ons
Thread Starter
TECH Veteran
iTrader: (4)
Joined: Aug 2006
Posts: 4,821
Likes: 0
From: San Marcos/Plano, Texas
What Bolt-ons Alright so i got a pretty much stock 2001 SS M6 and was wondering what bolt- ons i should get (giving me the best overall horsepower at the crank and wheels) If you have an SS or a WS6 and you have full bolt-ons, than tell me what they are and the best order (if you can) to buy them in. 
thanks
david
thanks
david
Last edited by mycamaroSS; Dec 6, 2006 at 10:11 PM.
I would/am doing.......lid, ported tb, Lt's, catback/duals, intake manifold (ls6)
Those are all the boltons i'm doing but you could also do a underdrive pulley and electric water pump. I dont think i will be doing either.
Those are all the boltons i'm doing but you could also do a underdrive pulley and electric water pump. I dont think i will be doing either.
Last edited by BayAreaSS; Dec 6, 2006 at 10:16 PM.
you don't need to keep saying ws6 or SS..... WS6, trans am , ss, z28, firehawk, C5 vette, they're all the same motor. and just because its a C5 vette doesn't mean its faster than an f-body. My stock 98 Z28 M6 ran 13.2 @107 , 2.0 short time. you see what i'm saying?
Originally Posted by BayAreaSS
I would/am doing.......lid, ported tb, Lt's, catback/duals, intake manifold (ls6)
Those are all the boltons i'm doing but you could also do a underdrive pulley and electrci water pump. I dont think i will be doing either.
Those are all the boltons i'm doing but you could also do a underdrive pulley and electrci water pump. I dont think i will be doing either.
I think the U/D pully is worth it, if you want to free up 8 to 10 RWHP!
you are right about the water pump, respectively.
Trending Topics
start with intake and exhaust. its always a good thing to let the engine breath easy. that way revs faster and make more power. if u can buy a mti lid, then get jethot headers and a off road y pipe or if u have the money go with x pipes. with all that and a tune u could gain 40-50 horse. if u have a 01 ss then u already have a ls6 intake.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by SSTYCOON
I think the U/D pully is worth it, if you want to free up 8 to 10 RWHP!
you are right about the water pump, respectively.
you are right about the water pump, respectively.
Originally Posted by mycamaroSS
Sweet, damn that's a lot of hp with just those thngs. Where's the best place to buy this stuff
after intake and exhaust u should do new rear be fore u brake it.but suspension would help alot. u can have all the power in the world but if u cant put it to the ground ur not going anywere
first suspen mod u should do is lca, panhard rod, torque arm, and lca relocation braquets, then bolt on sfc that u want to weld after u bolt them in. alot of people say as a first suspen mod is to buy new shocks usauly konis but un less ur trying to out run a bmw m3 then u can do that last. p.s. get some sticky tires. trust me