Brake Fluids. NEED HELP!
Originally Posted by Tainted
fluids fluid we stick whatevers around in all ours theres not much difference between them all
Whether it is silicon based or not?
Whether it is mixable with other fluids?
Maybe if I was driving a Civic I would agree to just through any old fluid in there... But I am not...
Originally Posted by Tainted
fluids fluid we stick whatevers around in all ours theres not much difference between them all
you're kidding with this sentence right??
yes there is.. its called DRY BOILING POINT and WET BOILING POINT.. use the regular old fluid in road racing conditions and see how fast your pedal will sink when you brake... the caliper will heat up so much it will boil your regular fluid pretty fast..
and for the poster..
I use Super Blue ATE... in both brakes and clutch fluid line..
if you need a stronger higher heat resistant than this.. look for Motul RBF 600.
Trending Topics
Originally Posted by GR33N GoblinM6
you're kidding with this sentence right??
yes there is.. its called DRY BOILING POINT and WET BOILING POINT.. use the regular old fluid in road racing conditions and see how fast your pedal will sink when you brake... the caliper will heat up so much it will boil your regular fluid pretty fast..
and for the poster..
I use Super Blue ATE... in both brakes and clutch fluid line..
if you need a stronger higher heat resistant than this.. look for Motul RBF 600.
yes there is.. its called DRY BOILING POINT and WET BOILING POINT.. use the regular old fluid in road racing conditions and see how fast your pedal will sink when you brake... the caliper will heat up so much it will boil your regular fluid pretty fast..
and for the poster..
I use Super Blue ATE... in both brakes and clutch fluid line..
if you need a stronger higher heat resistant than this.. look for Motul RBF 600.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo How do you feel about this stuff?
It says it has a 500*F dry boiling point. Seems pretty decent.
http://www.partsamerica.com/productd...egoryCode=3222
It says it has a 500*F dry boiling point. Seems pretty decent.
http://www.partsamerica.com/productd...egoryCode=3222
Originally Posted by AppleMac
Where are you guys getting Ate Superblue?
Is this something you can pick up locally?
Is this something you can pick up locally?
You can pick it up at any BMW dealership, you might be able to get it at VW, Audi, or Porsche dealerships.
I use FORD HD fluid, close to the same Dry Boiling point as Super Blue ATE and 2 bucks per bottle.
I think I am going to go with the ATE SUPER BLUE if I can find it.
dry/wet boil: 536/392
That is pretty damn good
I just don't feel like ordering brake fluid online...
Edit:
The Ford HD stuff seems like good stuff for track day... But its wet boiling point is pretty bad at 290.
dry/wet boil: 536/392
That is pretty damn good
I just don't feel like ordering brake fluid online...
Edit:
The Ford HD stuff seems like good stuff for track day... But its wet boiling point is pretty bad at 290.
Last edited by AppleMac; Mar 12, 2007 at 11:51 PM.
