Exhaust change-up *Now w/ PICTURES*
03-19-2007, 12:20 AM
#22
12 Second Club
Join Date: Jul 2006
Location: Pittsburgh,PA
Posts: 799
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orangeapeel
Wow! Did anyone else hear my knees pop in that video when I went to set the camera down?
no but mine do that **** too and im only 21. exhaust sounds sick though...good job
03-19-2007, 01:21 AM
#24
Tech Resident
Originally Posted by orangeapeel
my exhaust hangers are old stock pushrods for crying outloud!
"If you use your old pushrods for exhaust hangers on your Camaro, you might be a redneck."
and what a surprise, jordan lives in texas.
Dueling Banjos Scene from "Deliverance"
03-19-2007, 06:30 AM
#28
Banned
iTrader: (10)
Join Date: Aug 2002
Location: Phoenix
Posts: 3,721
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ChocoTaco369
i can just hear jeff foxworthy.
"If you use your old pushrods for exhaust hangers on your Camaro, you might be a redneck."
and what a surprise, jordan lives in texas.
Dueling Banjos Scene from "Deliverance"
"If you use your old pushrods for exhaust hangers on your Camaro, you might be a redneck."
and what a surprise, jordan lives in texas.
Dueling Banjos Scene from "Deliverance"
03-19-2007, 08:53 AM
#29
When my rubber isolator mysteriously disappeared on the way to school one day when I was on the highway and my tips went clink clink clinking down the highway (still all in one piece, attached to the car), I used two key rings to hold the hanger to the mount thing on the drivers side rear of the car. That was ghetto. I was sitting there (same day had just cleaned all the **** out of my car) and thinking to myself what the hell am I going to do. I tried using my belt, didnt work. Then I was getting back in the car about to call AAA and I looked at my keys and whabam!
Bent pushrods, freaking keyrings, anything that will hold up the exhaust is allowed!
Bent pushrods, freaking keyrings, anything that will hold up the exhaust is allowed!
03-19-2007, 09:29 AM
#32
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TheBlurLS1
I used 2 paper clips and the rubber band strap off a pair of lab goggals to hold the shift linkage together on my 5-speed Saturn after school one day. Then it stayed on there (working) for 2 years. 
One of my friends used a baseball card as a gasket on a dirt bike before, lol.
03-19-2007, 09:39 PM
#36
Starting to seem like it was not worth it. I will tell you one thing....The exhaust is more permanent than the paint on the car now. 
I used half a spool welding it all together and under the car. Has 6 hangers. 2 of them just keep it away from the gas tank.
I used half a spool welding it all together and under the car. Has 6 hangers. 2 of them just keep it away from the gas tank. 
