Another Exhaust question
Another Exhaust question I have a 2000 T/a, and i would like to upgrade to a true dual Exhaust X pipes, i was wondering if anyone offered a kit other than TSP, i like what TSP does but i would like something that goes over the axle and out the back. Is there any kits avaible to buy??
I was looking at these but i still need the pipes to go over the axle...
http://www.jegs.com/webapp/wcs/store...55652_-1_11525
http://www.jegs.com/webapp/wcs/store...45085_-1_11525
Something like that...
Can you help out please!
I was looking at these but i still need the pipes to go over the axle...
http://www.jegs.com/webapp/wcs/store...55652_-1_11525
http://www.jegs.com/webapp/wcs/store...45085_-1_11525
Something like that...
Can you help out please!
yeah, youll be hard pressed to find a bolt on TD system that goes over the axle. the only system i know of is Bassini, and that is made to be used with stock manifolds, so you would have to modify it. im not a big fan of it because it is not truly a dual setup AFIC because it flows all the exhaust into one muffler. idk, im happy with the dumped TSP setup i have.
yo could look into the universal dual exhaust kits in jegs or summit. they are designed with tubing to go over each side of the differential. but you could easily route them side by side like the bassani.
best bet is to use the standard Ypipe and just cut the junction off...then run the 2 "legs" into a magnaflow X junction, then out over the axle.
best bet is to use the standard Ypipe and just cut the junction off...then run the 2 "legs" into a magnaflow X junction, then out over the axle.
I don't believe anyone out there just sells over the axle true dual setups. Your best bet would be to find a good exhaust shop and then either piece together a set from some of the stores listed above or get the TSP system and then have them fab up the pipes to run it out the back.
If you want to do it right your going to have to go to a good exhaust shop to have them fab it up on the car.
I have stainless true dual's on my car which were done by American Racing Headers here on Long Island. They do amazing work!
You can check them out HERE
I have stainless true dual's on my car which were done by American Racing Headers here on Long Island. They do amazing work!
You can check them out HERE
Trending Topics
Originally Posted by Gordon0652
That looks amazing! Can i ask how much? I wanna give a guess of 2,750?
You can always give them a call and talk over your set-up with them, they're awesome to deal with
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Another idea is a good catback exhause!
Any ideas on this?
I am looking for something very loud and sounding like this Click here (will take a moment to load)
Any ideas on this?
I am looking for something very loud and sounding like this Click here (will take a moment to load)
well i cant tech. tell you places that are non-sponsors on this site....but you can buy a kit from a sponsor...headers/td dumps...have a shop install them and ask them to put them out the back...
id do headers myself...thats going to be the most expensive part....drive it to the shop and most places will do it for around 600-700$....so $700 for parts from TSP and $700 for labor is $600 less then 2000$
but your going to have to do the foot work here and find a shop that will do it....i dont live in your area
id do headers myself...thats going to be the most expensive part....drive it to the shop and most places will do it for around 600-700$....so $700 for parts from TSP and $700 for labor is $600 less then 2000$
but your going to have to do the foot work here and find a shop that will do it....i dont live in your area
Originally Posted by Gordon0652
ok, thank you for the info everybody, and i do have an idea of a shop!
Originally Posted by Gordon0652
Can you tell me where i should be looking, that would be an awesome start point!
Do a search for them on here or check out their site...you'll see a lot of great examples of the awesome work they do
Originally Posted by Gordon0652
Thats crazy, and i looked them up, and will give them a call tomarrow! Thank you!