TSP Rumbler
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: May 2006
Location: Kansas City, MO
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
TSP Rumbler
Anybody have any sound clips of this exhaust w/ lt's and ory I could only get one clip on ls1sounds.com to work and it was just an idle clip. does anyone have a clip of there's with an idle, rev and possibly a drive by/WOT takeoff. (preferably but doesn't have to be a cammed car)
and how is fitment/clearance with this system? it seems like a good deal at only about $250 after shipping
and how is fitment/clearance with this system? it seems like a good deal at only about $250 after shipping
#4
11 Second Club
iTrader: (14)
Join Date: Nov 2004
Location: Michigan (Macomb or Lansing)
Posts: 1,653
Likes: 0
Received 0 Likes
on
0 Posts
It would be the best flowing y-pipe possible with the 3 inch pipe.
I ran it and loved it, was a bit too loud with my cam though so I switched to tsp dual/dual w/ cutout.
PM me your email address i probably have some clips for you, i will have to take a look on my other computer.
I ran it and loved it, was a bit too loud with my cam though so I switched to tsp dual/dual w/ cutout.
PM me your email address i probably have some clips for you, i will have to take a look on my other computer.
#5
11 Second Club
iTrader: (14)
Join Date: Nov 2004
Location: Michigan (Macomb or Lansing)
Posts: 1,653
Likes: 0
Received 0 Likes
on
0 Posts
KK sendin you a compilation in a bit, here's one for now that's pretty sweet. I went with the torquer v3 cam. Actually, it wasn't too loud for me, but my neighbors and parents were complaining too much.
http://www.fquick.com/videos/SOM_T_A_Holeshot/558
http://www.fquick.com/videos/SOM_T_A_Holeshot/558
#6
12 Second Club
iTrader: (4)
Join Date: Sep 2005
Location: Fort Myers, FL
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Here's a clip of a run at the strip, before I switched catbacks/cams etc.
Link
The exhaust was Edelbrock LTs, Edelbrock ORY, TSP Rumbler catback.
I thought it sounded great at WOT and idle, but had a nasty blatt blat blat sound around 22-2500rpms at partial throttle. It would definitely be about as good as one could possibly flow out of a catback, you could roll a tennis ball through the catback I swear.
Link
The exhaust was Edelbrock LTs, Edelbrock ORY, TSP Rumbler catback.
I thought it sounded great at WOT and idle, but had a nasty blatt blat blat sound around 22-2500rpms at partial throttle. It would definitely be about as good as one could possibly flow out of a catback, you could roll a tennis ball through the catback I swear.