I saw that too.
worst case senario..
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Nov 2005
Posts: 642
Likes: 0
From: San Antonio,Texas
worst case senario.. ok this happened on friday i was torquing the head bolts down and well a bolt broke inside the block so i have to pull the motor out of the car, well i just ordered the qtp lifting plate and i was wondering if i can pull the motor and tranny out together or i have to take it out without the tranny thanks in advance guys
I think the motor has to come out from below the car...and the tranny can still be attached. Coincidentally, they just pulled the motor/tranny out of a '98 SS this morning on Horsepower TV.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Nov 2005
Posts: 642
Likes: 0
From: San Antonio,Texas
quick question, ok im gonna pull the motor out this weekend hopefully and well i was wondering since my car has been sitting for at least six months how can i clean up all the old coolant that was inside the bolt holes??? any recommendations..
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Nov 2005
Posts: 642
Likes: 0
From: San Antonio,Texas
i think i might have to buy a shop vac of some sort hopefully i can get a good deal on one... but even though the engine coolant is a lil thick its still be able to blow out of cylinder bolt holes..
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Nov 2005
Posts: 642
Likes: 0
From: San Antonio,Texas
yea they re new gm bolts, i have to pull the motor out so polly next weekend ill messed with it i aint in no hurry!!! but i talked to a machine shop by my house, and they ve been around for a while, well the guy there said he ll remove the bolt and clean up the engine/cylinder bolt holes for me for 40 bucks not bad at all.
Thread Starter
TECH Enthusiast
iTrader: (3)
Joined: Nov 2005
Posts: 642
Likes: 0
From: San Antonio,Texas
some good news i talk to trev from texas-speed god bless those guys, and he told me its possible but just for me to get the car off of the ground a lil more then a foot or so but thats no big deal but yea i look forward to this weekend and ill get that car running in no time!!!