What is the cheapest way to make my car louder ?
#41
12 Second Club
Join Date: Apr 2003
Location: Austin, Texas
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
#42
take out the stock exhaust and buy a used one, i had a guy sellin TSP True duals for 125 locally... find a used loudmouth, it sounds GREAT with stock manifolds/cats... headers and ory.. different story.... has me welding in a borla xr 1 as we speak.
and a bigger ypipe can help too, ive got random tech cats/ypipe for the stock manifolds im sellin for beans locally, check local messageboards (scared to say cuz they not a sponsor)
and a bigger ypipe can help too, ive got random tech cats/ypipe for the stock manifolds im sellin for beans locally, check local messageboards (scared to say cuz they not a sponsor)
#44
12 Second Club
Join Date: Jul 2006
Location: Ellicott City,MD
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
QTP Electric cutout is the way to go. If you cant afford electric get a manual and you could always get the electric part later. If you get an electric when you run the wire, make sure you run it towards the front of the car. Theres a predrilled hole under the passenger side rear seat but if you run the wire there the exhaust will eventually melt the wire. Ive had both the plate and electric and I hated everyday I had the plate.
#45
Teching In
Join Date: Jun 2007
Location: Greenville, sc
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
If you truly want the cheapest and loudest, remove your exhaust system up to the headers and turn em down but cut outs are the best thing to do. manual cutouts only run about 20-30 and electric can run anywhere from 200-500...or you can make them yourself out of a butterfly valve and a solenoid motor.
#46
Of course this can not be done for 200 dollars.
Go with the cutout
#51
TECH Senior Member
iTrader: (1)
Join Date: Apr 2005
Location: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Posts: 8,807
Likes: 0
Received 0 Likes
on
0 Posts
QTP Electric cutout is the way to go. If you cant afford electric get a manual and you could always get the electric part later. If you get an electric when you run the wire, make sure you run it towards the front of the car. Theres a predrilled hole under the passenger side rear seat but if you run the wire there the exhaust will eventually melt the wire. Ive had both the plate and electric and I hated everyday I had the plate.
#54
TECH Enthusiast
iTrader: (6)
Join Date: Apr 2007
Location: Ashland, KY
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
without reading everyone elses' responses, i'd say the CHEAPEST way to make your car loud - hack saw the muffler off, that will make it loud, if you want to invest a little money then go to the nearest exhaust place and have them weld in a pipe in it's place so it runs out ur tips and not under the car.
#55
11 Second Club
iTrader: (8)
Join Date: Aug 2005
Location: Pasadena, CA
Posts: 2,451
Likes: 0
Received 0 Likes
on
0 Posts
buy dynomax bullet weld it in after the Y pipe. cut out the rest of the exhaust after the dynomax bullet , so that way you remove the muffler. so you spend like 25 bucks on the bullet muffler and youll need some cutting tools and a welder.