New Product - WS6 Functional Ram Air Kit!
#42
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
mee too. . . the kit doesn't seem to have any and inside the hood nostrils there doesnt seem to have a nice straight smooth shot in the airbox. . .I think ima make my own funnels, once i get another WS6 T/A.
#44
TECH Senior Member
iTrader: (4)
Join Date: Dec 2003
Location: Arlington TX
Posts: 5,276
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They don't sell them. The only portions of the kit that is still sold is the seal that seals the air box to the hood, the rain blocker and the little corner parts where the screws go that hold the grill
#48
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The funnels are not being made anymore, those were the main part of the BGRA.
The first pic only shows one nostrils due to the angle of the pic taken. Both nostrils are used. . .
The first pic only shows one nostrils due to the angle of the pic taken. Both nostrils are used. . .
#49
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Dec 2001
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The kits are designed to fit the OEM WS6 holes as they reuse all the existing holes once the baffles are removed (no drilling required).
The hit would work on an aftermarket hood as long as the underhood air outlets and design are exactly the same as the OEM hoods. You likely would have to drill the holes to mount the seals though since I doubt the aftermarket onces incorporate those into the design.
The hit would work on an aftermarket hood as long as the underhood air outlets and design are exactly the same as the OEM hoods. You likely would have to drill the holes to mount the seals though since I doubt the aftermarket onces incorporate those into the design.
#60
On The Tree
iTrader: (20)
Join Date: Sep 2007
Location: Toms River, NJ
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 2000 WS6 and as far as I know the hood is stock, but how to you get that big hole in front of the air box? I Have no rivets there at all-like the pic has holes-I am guessing where the rivers where for that one piece, that you take out? Maybe I am missing something....