alt bracket and 6.0 iron block

Reply Subscribe

Thread Tools

Search this Thread

Nov 5, 2007 | 07:34 AM

blackws69

Thread Starter

On The Tree

Joined: Nov 2004

Posts: 178

Likes: 0

From: nc nof now

alt bracket and 6.0 iron block

for the 408 with the cast iron block where or does anyone know who makes a bracket for the alt. this is going into a 01 ta. the usual place that it mounts does not have the three holes in the block for the old bracket. i have the engine in and everything bolted up and when i went to put the alt in i discovered this little problem. any help or advice will be greatly appreciated.

Nov 5, 2007 | 10:29 AM

98hc4mula

TECH Enthusiast

iTrader: (5)

Joined: Feb 2004

Posts: 590

Likes: 1

From: DFW

you need to drill and tap for the bolt.

Nov 5, 2007 | 11:06 AM

Beaflag VonRathburg

OWN3D BY MY PROF!

iTrader: (176)

Joined: Feb 2006

Posts: 9,146

Likes: 3

From: Jax Beach, Florida

Quote:

Originally Posted by 98hc4mula

you need to drill and tap for the bolt.

+1 it's not that difficult.

Nov 5, 2007 | 05:10 PM

vanilla89

TECH Enthusiast

iTrader: (8)

Joined: Dec 2005

Posts: 622

Likes: 0

From: dallas tx

x2, who ever built your motor should of done that, mine was done when i got it.

Nov 6, 2007 | 12:28 AM

SOM 02

On The Tree

iTrader: (10)

Joined: Jul 2005

Posts: 113

Likes: 0

From: bay area

ahh crap looks like i have to check mine. hope that they are already there i have had enough problems with my car already

Nov 6, 2007 | 06:12 AM

blackws69

Thread Starter

On The Tree

Joined: Nov 2004

Posts: 178

Likes: 0

From: nc nof now

i was hoping that i wouldn't have to do that, that someone made a bracket for it, but i guess i know what i'm going to be doing this weekend. the drill mod to the block.