00Formula00

iTrader: (6)

How do you get the bolt cracked if you cant get to the flexplate? I have the tool but I dont see anywhere to put it with the tranny hooked up...

I have a couple of friends saying that an impact gun may work without even having to hold the flexplate

00Formula00

iTrader: (6)

Anyone???

youguessit

you meen the bolt that holds the stall on it right? if thats it you can put a screwdriver throught the pulley to hold the crank still

sroach20

iTrader: (31)

i hit mine with an impact and the crank bolt came right out.

WE TODD DID

iTrader: (2)

Impact.

98Camarod

iTrader: (43)

Screwdriver that will not bend easily wedged in there. Thats what I had to do the three times I've done it.

00Formula00

iTrader: (6)

Impact, done, really easily too....If you have an auto impact seemed like the way to go

AFTICA

iTrader: (8)

I wedge a breaker bar on the frame and bump the starter. Regardless of how you get it off you'll have to grab the flywheel with a tool or screwdriver to get it back on and torqued to spec.

mikep2002

iTrader: (10)

http://forums.corvetteforum.com/show....php?t=1898844 (post #9)
Not sure if I`m breaking the rules but I found this interesting? If I am let me know and I will delete.