View Poll Results: What should be next?
Underdrive pulley - ASP or March
45
91.84%
MAF Sensor - Granatelli
0
0%
Other option I couldn't think of
4
8.16%
Voters: 49. You may not vote on this poll
MAF or Pulley?
04-06-2008 | 12:44 PM
#1
Thread Starter
TECH Enthusiast
Joined: Jan 2004
Posts: 611
Likes: 0
From: Fairfield, CA
MAF or Pulley? I am a full bolt on car (almost): BGRA, K&N filter, Descreened MAF Sensor, FAST 78mm TB, TB Bypass mod, FAST 78mm Intake manifold, BBK 1 3/4 SHORTY headers, Magnaflow High Flow Cats, Texas Speed Rumbler Exhaust, Seafoamed, cleaned MAF Sensor, I think that is it.
Please don't say something ridiculous like weight reduction, this is my daily driver and am looking to pick up some extra ponies. I gave ~$300 to spend and figured the MAF Sensor or pulley would be a good place to start, just wanted to know what would net me more gains in my configuration. Thanks.
Please don't say something ridiculous like weight reduction, this is my daily driver and am looking to pick up some extra ponies. I gave ~$300 to spend and figured the MAF Sensor or pulley would be a good place to start, just wanted to know what would net me more gains in my configuration. Thanks.
Last edited by Nick D; 04-06-2008 at 12:52 PM.
04-06-2008 | 01:04 PM
#2
I said pulley for this reason. When I asked the guy who will tune my car about a MAF he said to get a Z06 MAF and he will tune it during the tune, otherwise the SLP and others are a waste. When I first bought my car a friend gave me an SLP MAF and afetr installing it the car smelled terrible and didnt seem to drive right so I believe him.
As for the UD pulley I am going with a March when I do my H/C swap in the near future. The only things to think about are weather to get the overdrive alt pulley or not(I will due to my stereo).Just my .02
As for the UD pulley I am going with a March when I do my H/C swap in the near future. The only things to think about are weather to get the overdrive alt pulley or not(I will due to my stereo).Just my .02
Trending Topics
04-06-2008 | 06:27 PM
#12
((((((Administrator))))))
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
A little, it rev's up a little faster.
I voted ASP pulley, don't worry about a MAF until you step up your FAST to a 90/90, and you don't even really need that combo until a bigger cube motor. Once you do get 90/90 and cubes, get a Granatelli 85mm MAF.
Peace,
Craig.
I voted ASP pulley, don't worry about a MAF until you step up your FAST to a 90/90, and you don't even really need that combo until a bigger cube motor. Once you do get 90/90 and cubes, get a Granatelli 85mm MAF.
Peace,
Craig.
04-06-2008 | 07:03 PM
#14
Um, I wouldn't recommend Granatelli anything, their track record is probably one of the worst as far as after market, I'm talking 7 bad thing to every good thing said about them.
I've been told if you are going to get a new maf get a Z06 os SLP
I've been told if you are going to get a new maf get a Z06 os SLP
04-06-2008 | 07:10 PM
#15
((((((Administrator))))))
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
No the Granatelli MAF's are fine. When I put the FAST 90/90 on my 427 I asked my tuner Jayson Cohen (owner of MTI) which to get SLP 85mm or Granatelli 85mm before he tuned it he said Granatelli. The SLP 85mm leans out up top, even with a tune. When one of the best LSX tuners out there speaks, I listen.
Peace,
Craig.
Peace,
Craig.
04-06-2008 | 07:17 PM
#17
((((((Administrator))))))
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
