Updates. The nissan TPS works just fine, all you need to do is splice in the wiring with a weather pack connector.

 

Kudos on doing it yourself. You should do a before and after dyno comparison. That is if you ever dynoed it before.

 

sweet!
so a oem nissan tps will work correctly with the gm pcm and harness, after modification?
how does it affect tuning? what about the iac? any issues with that?
looks good, the nissan tps sends the appropriate signal to the pcm?

 

nissan signal sends everything just fine. all you need to do is set the sensor so that its at the correct voltage which is around .6v. there is no IAC, you just set the idle with the set screw and adjust the TPS to recognize the setting as zero percent.