Quick FAST 92 install questions
Quick FAST 92 install questions The instructions for the FAST 92 say that on 98-00 F-bodies you need to replace the rear coolant vent line and use 2 plugs. My 99 SS had an LS6 intake on it when I bought it; since I already have the same intake as the 01-02s, do I need to worry about this step? Also, will stock replacement intake port seals work, or do I need a FAST specific part? Thanks in advance!
You need to look under your LS6 intake and see if the front coolant pipes are connected to the rear ones. If it does, you will need to buy the newer style crossover pipes. Its possible to run the LS6 intake on the old 'I' style coolant lines by breaking the tabs under the intake, but you cannot run a FAST intake with it. If your front coolant pipe only only runs to both cylinder heads and out the front your good. I'm not sure on the intake seals though. They looked the same to me but I didnt try it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
