CheatR Cam - 918s or PRC & Which Pushrods?

Reply Subscribe

Thread Tools

Search this Thread

Oct 20, 2008 | 11:19 AM

LS1Aggie09

Thread Starter

TECH Fanatic

iTrader: (25)

Joined: Jan 2006

Posts: 1,271

Likes: 0

From: Katy & College Station, TX

CheatR Cam - 918s or PRC & Which Pushrods?

What springs do y'all think?

214/230 .601/.575 117 LSA are the CheatR specs.

What pushrods do you suggest?

Thanks!

-Karl

Last edited by LS1Aggie09; Oct 20, 2008 at 05:28 PM.

Oct 21, 2008 | 10:33 AM

LS1Aggie09

Thread Starter

TECH Fanatic

iTrader: (25)

Joined: Jan 2006

Posts: 1,271

Likes: 0

From: Katy & College Station, TX

bump! sponsors?

Oct 21, 2008 | 12:24 PM

PREDATOR-Z

TECH Senior Member

Joined: Mar 2004

Posts: 14,620

Likes: 17

From: BFE

7.425 cam only and dual springs like Patriot Gold

Oct 21, 2008 | 08:14 PM

Jason 98 TA

LS1Tech Premium Sponsor

iTrader: (4)

Joined: Nov 2001

Posts: 4,229

Likes: 4

From: Texas!

Make sure when choosing a spring kit you choose a proven kit with consistant install heights. Foreign made retainers with crazy off install heights can cause serious problems down the road. We closely monitor all retainers shipped in the Precision Race Components spring kits. Screwed up install heights is something not a lot of people check, but it can definately cause issues....

For the money the PRC spring kit will offer you .660" lift springs, seats, seals & retainers carefully configured to keep a correct install height ON EVERY CYLINDER!!

__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com

Oct 21, 2008 | 08:50 PM

LS1Aggie09

Thread Starter

TECH Fanatic

iTrader: (25)

Joined: Jan 2006

Posts: 1,271

Likes: 0

From: Katy & College Station, TX

Would 7.4 pushrods be good to keep the lift? i am getting a set of y'alls PRC kits jason. what pushrod length should I use?

Oct 21, 2008 | 08:52 PM

Gregorya24

Launching!

iTrader: (13)

Joined: Jan 2008

Posts: 285

Likes: 0

From: Charleston, SC

7.4 length is what you need

Oct 21, 2008 | 10:08 PM

LS1Aggie09

Thread Starter

TECH Fanatic

iTrader: (25)

Joined: Jan 2006

Posts: 1,271

Likes: 0

From: Katy & College Station, TX

alright well i just picked up all the valvetrain stuff. its getting shipped to me as of tomorrow. i'll be inspecting it with some friends once it comes in. thanks for the input. PRC kit from TSP is what i got

-Karl