HIGH RPMs A Must?
JPH.....I have read many of your posts and respect your knowledge as one of the more experienced cam guys on this site but that just seems a little low to me. I mean my similar cam (sig) was still carrying almost flat at 6500 and making 410 or so. Does the 5* of advance bring peak down that far????
Educate me here
Educate me here
JPH.....I have read many of your posts and respect your knowledge as one of the more experienced cam guys on this site but that just seems a little low to me. I mean my similar cam (sig) was still carrying almost flat at 6500 and making 410 or so. Does the 5* of advance bring peak down that far????
Educate me here
Educate me here
Thanks. And yes, combined with other components. The intake valve here is closing at roughly 41*, that will inchange have a sooner/earlier peak. The cam actually checked in at a 106ICL or 8* IVO with a certain rocker we were using. It is a A4 car with 243s, a 3800 stall with a ported FAST 78. Shoot me you e mail address and I can send you a copy if you would like.
Still trying to learn all I can from guys like you. I will PM you my email along with a couple other ???'s for you.Thanks with your patience
